FREE delivery on orders over €150
CLEVELAND C63511 Ball End Mill, 4 Flutes, 1/32 Inch Milling Dia
Item: CQ9DXKModel: C63511Cross Ref: 33GA92
7 In Stock
Ships within 2 days via
€22.45 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Ball End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right Hand |
| Cutting Length | 0.094" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Ball Nose |
| End Type | Single End |
| Finish | Bright Uncoated |
| Finish-machining | Bright (Uncoated) |
| Grade | General Purpose |
| Hardened Compatibility | Yes |
| Helix Angle | 30° |
| Length Of Cut | 3/32" |
| List Number | CEM-SE-4B |
| Material | Carbide |
| Material Application | Aluminum, Carbon Steel, Alloy Steel, Cast Iron |
| Material Grade-machining | General Purpose |
| Material-machining | Carbide |
| Milling Dia. | 0.0312" |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 1 1/2" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N, P, K |
| Shank Dia. | 1/8" |
| Shank Type | Straight |
| Shank Type-machining | Straight |
| Single End/double End | Single End |
| Spiral Direction | Right Hand |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | Yes |
| System Of Measurement | Imperial |
Shipping Info:
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Milling Dia. | Helix Angle | End Type | List Number | Length Of Cut | Cutting Length | End Mill Application | End Mill Style | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C70374 | 0.021" | 30° | Single End | CEM-EG-2 | 1/25" | 0.031" | Engraving | Ball Nose | €48.73 | |
| C70376 | 0.03" | 30° | Single End | CEM-EG-2 | 1/25" | 0.031" | Engraving | Ball Nose | €48.73 | |
| C70375 | 0.025" | 30° | Single End | CEM-EG-2 | 1/25" | 0.031" | Engraving | Ball Nose | €48.73 | |
| C60917 | 1/16" | 30° | Single End | CEM-SE-2B | - | 1/4" | Finishing | Ball Nose | €23.13 | |
| C60916 | 1/16" | 30° | Single End | CEM-SE-2B | - | 1/8" | Finishing | Ball Nose | €18.34 | |
| C80917 | 1/16" | 30° | Single End | CEM-SE-2B-TA | - | 1/4" | Finishing | Ball Nose | €29.03 | |
| C80916 | 1/16" | 30° | Single End | CEM-SE-2B-TA | - | 1/8" | Finishing | Ball Nose | €24.81 |
Explore Products
- DRI-EAZ Revolution LGR Industrial Compact Dehumidifier, Low-Grain Refrigerant, 180 Cfm Max. Air Flow
- EATON ECX09E1BNA-R63/C
- SEALMASTER NP-39T HI 724840 Pillow Block Bearing, 2 Bolt, 2.4375 Inch Dia, Skwezloc Locking, Nomex Seal
- TITAN FASTENERS YJB14F
- WALTER TOOLS P202608-M16 6149131 Spiral Point Tap, M16X2 Thread Size, 25 mm Thread Length, 110 mm Length
- DESTACO 6004-SWL Pneumatic Swing And Toggle Clamp, 11-13/16 Inch Overall Length
- WEG CSW30-BGAI4D66 14381199 Pushbutton, Illuminated recessed, 240 VAC/VDC Lamp Voltage, Blue
Explore More
- KEYSHAFT
- Vehicle Work Lights
- Heating and Cooling Tools
- Hydronic Kickspace Heater Cabinets
- Cable Protectors
- Ceiling Fans
- DESTACO Position Sensor Tie Rod Mount
- LUMAPRO Wall Packs
- ANSELL 97-008 Activarmr Nitrile Coating Cut Resistant Gloves
- DESTACO 375-R Series Pull Action Latch Clamps
- BRADY Arrow Tape, White/Red
- VULCAN HART Valve Lever
- DESTACO 5305 Series Horizontal Hold Down Clamps
- GROHE Control Units
- CALBRITE Saddle Washers, Stainless Steel
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C63511 Ball End Mill, 4 Flutes, 1/32 Inch Milling Dia
€22.45 /unit