FREE delivery on orders over €150
CLEVELAND C61915 0 Corner Radius End Mill, 4 Flutes, 3/4 Inch Milling Dia
Item: CQ9FUZModel: C61915Cross Ref: 33GA76 / 0
7 In Stock
Ships within 2 days via
10.00% off
€259.81 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Corner Radius End Mill |
| Cast Iron (k) Compatibility | Yes |
| Corner Radius | 0.03" |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 1 1/2" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Type | Single End |
| Finish | Bright, Uncoated |
| Finish - Machining | Bright (Uncoated) |
| Grade | General Purpose |
| Hardened Compatibility | No |
| List Number | CEM-SE-4 |
| Material | Carbide |
| Material - Machining | Carbide |
| Material Grade - Machining | General Purpose |
| Measurement System | Fractional Inch |
| Milling Dia. | 3/4" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 4 |
| Overall Length | 4" |
| Primary Material Application | Aluminum, Brass, Bronze, Copper, Magnesium |
| Primary Material Application Iso Code | N |
| Shank Dia. | 3/4" |
| Shank Type | Straight |
| Shank Type - Machining | Straight |
| Single End/double End | Single End |
| Stainless (m) Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.35 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 13.49 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Model | Number Of Flutes | Shank Dia. | Overall Length | List Number | Milling Dia. | Helix Angle | Corner Radius | Cutting Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| C61080 | 2 | 1" | 4" | CEM-SE-2 | 1" | 35° | 0.06" | 1 1/2" | €451.99 | |
| C61081 | 2 | 1" | 4" | CEM-SE-2 | 1" | 35° | 0.09" | 1 1/2" | €451.99 | |
| C61079 | 2 | 1" | 4" | CEM-SE-2 | 1" | 35° | 0.03" | 1 1/2" | €451.99 | |
| C61056 | 2 | 1/2" | 3" | CEM-SE-2 | 1/2" | 35° | 0.09" | 1" | €104.84 | |
| C61055 | 2 | 1/2" | 3" | CEM-SE-2 | 1/2" | - | - | 1" | €104.84 | |
| C61028 | 2 | 1/4" | 2 1/2" | CEM-SE-2 | 1/4" | 35° | 0.03" | 3/4" | €40.48 | |
| C61027 | 2 | 1/4" | 2 1/2" | CEM-SE-2 | - | 35° | 0.02" | 3/4" | €40.48 |
Explore Products
- NORTON ABRASIVES 66253262513 Straight Grinding Wheel, 12 Inch Dia., 5 Inch Hole Size, 1 Inch Thickness, Ceramic
- ONSRUD AMC703752 Square End Mill, Center Cutting, 3 Flutes, 1/4 Inch Milling Dia, 3/4 Inch Length Of Cut
- NIBCO PT40138P
- MAIN FILTER INC. MF0062848 R426G06V Interchange Hydraulic Filter, Glass, 5 Micron, Viton Seal, 25.67 Inch Height
- DAYTON 7A408 Exhaust Vent 30 In
- LIFT-ALL EN1604NX14 Web Sling Endless L14ft 8600lb W4in
- GRAINGER BULK-CRK-57 Gasket Sheet, Cork Buna-N Rubber Blend, 1 ft Length, 1 ft Width, 1/4 Inch Thick
- CHICAGO-LATROBE 45009 Jobber Length Drill Bit, #39 Size, 1-3/8 Inch Flute Length, 2-3/8 Inch Length
Explore More
- HUSKY
- JOHNS MANVILLE
- KEYSHAFT
- GERBER PLUMBING
- TRIPLETT
- Taper Length Drill Bits
- Push to Connect Tube Fitting Accessories
- Door Knob Locksets
- Reference Guides
- Hydronic Unit Heater Accessories
- AUTOQUIP Super Titan Scissor Lift Tables
- HELICOIL Straight Flute Plug Taps, 4H5H, Metric Coarse
- CONDOR High Visibility Cowhide Leather Palm Gloves, Yellow
- DESTACO 500 Series Weldable Vertical Hold Down Clamps
- LUCKY LINE PRODUCTS Load Rated Connector
- SOUTHWIRE COMPANY Flex Auger Bit
- HUBBELL PREMISE WIRING Single Side Horizontal Ring Managers
- SNAP-TITE H Series Nipples
- SPEAKMAN Neo CPT-1001 Series Shower Valve Trims
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C61915 0 Corner Radius End Mill, 4 Flutes, 3/4 Inch Milling Dia
€288.67 /unit