FREE delivery on orders over €150
CLEVELAND C61865 Square End Mill, Center Cutting, 4 Flutes, 5/16 Inch Milling Dia, 1 1/8 Inch Length Of Cut
Item: CQ9WLBModel: C61865Cross Ref: 33GA26
7 In Stock
Ships within 2 days via
€57.47 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 1 1/8" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Bright Uncoated |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | CEM-SE-4 |
| Material | Carbide |
| Material Grade-machining | General Purpose |
| Measurement System | Fractional Inch |
| Milling Dia. | 0.312" , 5/16" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 3" |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Primary Material Application Iso Code | K, M, P |
| Shank Dia. | 0.312" , 5/16" |
| Shank Type | Straight |
| Single End/double End | Single End |
| Stainless Compatibility | Yes |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.05 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.2 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Milling Dia. | Shank Dia. | Overall Length | List Number | Helix Angle | Length Of Cut | Cutting Length | Material | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C61078 | 1" | 1" | 4" | CEM-SE-2 | - | - | 1 1/2" | Carbide | €331.58 | |
|
C61082 | 1" | 1" | 5" | CEM-SE-2 | - | - | 2 1/4" | Carbide | €511.41 | |
 |
C61083 | 1" | 1" | 6" | CEM-SE-2 | - | - | 3" | Carbide | €590.72 | |
|
C61058 | 1/2" | 1/2" | 6" | CEM-SE-2 | - | - | 1 1/2" | Carbide | €118.20 | |
|
C61053 | 1/2" | 1/2" | 3" | CEM-SE-2 | 35° | - | 1" | Carbide | €74.13 | |
 |
C60655 | 1/2" | 1/2" | 3" | CEM-SEST-2 | 0° | - | 1" | Carbide | €94.57 | |
|
C61057 | 1/2" | 1/2" | 4" | CEM-SE-2 | - | - | 2" | Carbide | €98.99 |
Explore Products
- MAIN FILTER INC. MF0429800 0660R050WHC Hydraulic Filter, Wire Mesh, 50 Micron, Viton Seal, 13.11 Inch Height
- SMC VALVES ISE80H-N02L-B Pressure Switch, 1/4 Inch N Port Size
- RIDGID 95560
- 3M 4910 Double Coated Tape Clear 2 Inch
- KUNKLE 0548-C01-KM0125 Safety Relief Valve, 1/2 Inch Inlet Size, 125 PSI, Stainless Steel
- HUBBELL WIRING DEVICE-KELLEMS SFFSCSRG Keystone Snap Fit, Flush, SC Simplex, Zircon Sleeves, Red, Gray Housing
- BALDOR / DODGE 23QZ30R14LTWP TIGEAR-2 Reducer-LOW TEMP-White
- GRAINGER SVFWYE80 Wye, Cast Iron, 8 Inch X 8 Inch X 8 Inch Pipe
Explore More
- KEYSHAFT
- Welding Helmets
- Soapstones
- Convolute Non-Woven Wheels
- Cabinet Bench Accessories
- Reservoir Accessories
- DESTACO 6004 Series Straight Line Action Clamps
- HELICOIL Spiral Point Plug Taps, UNC, 3B
- ANSELL Class 0 Electrical Gloves, 11 Inch, Red
- DESTACO 374-M Series Pull Action Latch Clamps
- KEO Small Keyseat Cutters, Shank Type, Solid Carbide
- CONRADER CAC Series In-Tank Check Valves
- PASS AND SEYMOUR Radiant Series Four Way Switches
- BOSTON GEAR 10 Transverse Diametral Pitch Left Hand Steel Hardened Helical Gears
- STAFFORD MFG Solution Series Machinable Shaft Adapter Max With Keyways
- TRITAN UCP Series Pillow Block Bearings
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C61865 Square End Mill, Center Cutting, 4 Flutes, 5/16 Inch Milling Dia, 1 1/8 Inch Length Of Cut
€57.47 /unit