FREE delivery on orders over €150
CLEVELAND C41520 High Speed Steel End Mill 1/8 Inch D 3/8 Inch Cut L
Item: AC4ZAAModel: C41520Cross Ref: 31C645
7 In Stock
Ships within 2 days via
€42.16 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | High Speed Steel End Mill |
| Chip Breaker | No |
| Corner Radius | 2.312" |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 3/8" |
| Cutting Type | Center |
| Dia. | 1/8" |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End | Single |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Material | High Speed Steel |
| End Mill Style | Square |
| End Type | Single End |
| Finish-machining | Tin |
| Grade | General Purpose |
| Helix Angle | 30° |
| Length Of Cut | 3/8" |
| List Number | HG-4C-TN |
| Material | High Speed Steel |
| Material Grade | General Purpose |
| Material Grade-machining | General Purpose |
| Material-machining | High Speed Steel |
| Milling Dia. | 1/8" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Overall Length | 2 5/16" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Shank Dia. | 3/8" |
| Shank Type | Weldon Flat |
| Shank Type-machining | Weldon Flat |
| Single End/double End | Single End |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.03 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 8.2 |
| Ship width (cm) | 2.54 |
| HS code | 8207703030 |
| Country of Origin | US |
Product Variants
| Product | Model | Cutting Direction | Shank Dia. | Overall Length | Milling Dia. | Length Of Cut | Helix Angle | List Number | End Mill Cutting Type | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C42096 | Right Hand | 3/8" | 2 3/4" | 1/8" | 3/16" | 30° | HD-2 | Center Cutting | €40.14 | |
 |
C39044 | Right Hand | 3/8" | 2 3/4" | 1/8" | 3/16" | 30° | HD-2-TN | Center Cutting | €42.60 | |
 |
C39049 | Right Hand | 3/8" | 2 3/4" | 1/8" | 0.188" | 0.188" | - | - | €45.87 | |
|
C42051 | Right Hand | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | HD-2 | Center Cutting | €44.83 | |
|
C33648 | Right Hand | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | HD-2-TN | Center Cutting | €49.02 | |
|
C33689 | Right Hand | 3/8" | 3 1/16" | 1/8" | 3/8" | 30° | HD-2-TC | Center Cutting | €52.20 | |
|
C33626 | Right Hand | 3/8" | 3 1/8" | 9/64" | 7/16" | 30° | HD-2 | Center Cutting | €51.09 |
Explore Products
- WINTERS INSTRUMENTS PEU1437UC 2.5 Inch, Dial, U-Clamp 1/4 Inch, Back 0-30Psi/Kpa
- CONTINENTAL G-1260 Industrial Timing Belt, 52 1/2 mm Top Width, 14 mm Pitch, 1, 260 mm Pitch Length, 90 Teeth
- ERICKSON CV50EM100600 End Mill Holder, Cv50 Taper Size, 6 Inch Projection, 2 Inch Nose Dia
- SLOAN 3011619 ROYAL 152-3.5-J-3-3/4-LDIM Water Closet Flushometer, Manual, 3.5 gpf, RB Finish, Rear Spud, Single Flush
- HAYWARD EXT24FVS45
- GROVE GEAR EL8180529.16 EL-HM818-20-H_-140-16 Right Angle Gear Reducer, 20 to 1 Reduction Ratio, 87 RPM Output, 630 lb-in Torque, Aluminum
Explore More
- KEYSHAFT
- Pallets
- Modular Pipe and Rail Fittings
- Eyewear Dispensers
- 5S Red Tag Stations
- Brazing Alloys
- DESTACO 8007 Series Pneumatic Toggle Clamps
- CONDOR High-Visibility Vest, Mesh Polyester, X Stripe Pattern, Single, Lime
- KEO Combined Drills And Countersinks, Single-End Bell-Hey Type, 60 Degrees Countersink Angle
- GLOBE SCIENTIFIC Label Sheets, Cryo, 38 x 19 mm Size
- ANVIL AS500BTB Series Welded Channels
- PEMKO Geared Piano Hinges
- JOHNSON CONTROLS Thermostat Cover
- VERMONT GAGE Go Standard Thread Plug Gages, 2 1/8-8 Un
- SPEEDAIRE Covers
- ZURN 950XL3 Reduced Pressure Principle Backflow Preventers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C41520 High Speed Steel End Mill 1/8 Inch D 3/8 Inch Cut L
€42.16 /unit