FREE delivery on orders over €150
CLEVELAND C33792 0 Square End Mill, Center Cutting, 2 Flutes, 1 Inch Milling Dia, 1 1/2 Inch Cut
Item: CQ9UUZModel: C33792Cross Ref: 438F21 / 0
7 In Stock
Ships within 2 days via
10.00% off
€118.35 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip-breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 1 1/2" |
| Cutting Type | Center Cutting |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Tin |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HG-2-TN |
| Material | High Speed Steel |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 1" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Non Ferrous (n) Compatibility | Yes |
| Number Of Flutes | 2 |
| Overall Length | 4 1/8" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Shank Dia. | 7/8" |
| Shank Type | Weldon |
| Stainless (m) Compatibility | No |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship height (cm) | 2.59 |
| Ship length (cm) | 12.29 |
| Ship width (cm) | 2.59 |
| Country of Origin | US |
Product Variants
| Product | Model | Number Of Flutes | Primary Material Application | Shank Dia. | List Number | Overall Length | Helix Angle | Cutting Direction | Milling Dia. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C38916 | 2 | Cast Iron, Steel | 1 1/4" | HG-2-TC | 4 1/2" | 30° | Right Hand | 1 1/2" | €380.12 | |
|
C33799 | 2 | Cast Iron, Steel | 1" | HG-2-TN | 4 1/2" | 30° | Right Hand | 1 1/2" | €359.63 | |
|
C38915 | 2 | Cast Iron, Steel | 1" | HG-2-TC | 4 1/2" | 30° | Right Hand | 1 1/2" | €377.15 | |
|
C33800 | 2 | Cast Iron, Steel | 1 1/4" | HG-2-TN | 4 1/2" | 30° | Right Hand | 1 1/2" | €359.63 | |
|
C33796 | 2 | Cast Iron, Steel | 1" | HG-2-TN | 4 1/2" | 30° | Right Hand | 1 1/4" | €271.15 | |
 |
C38911 | 2 | Cast Iron, Steel | 7/8" | HG-2-TC | 4 1/8" | 30° | Right Hand | 1 1/4" | - | RFQ
|
 |
C38912 | 2 | Cast Iron, Steel | 1" | HG-2-TC | 4 1/2" | 30° | Right Hand | 1 1/4" | €290.56 |
Explore Products
- BROWNING 1012111 5C90R V-Belt Sheave, Multiple, Bushed Bore, 5 Groove, Cast Iron
- HOFFMAN A74H6012SSLP 84290 Floor Stand Enclosure, Two Door, With Clamps, 74 x 60 x 12 Inch Size, 304 SS
- HUMBOLDT H-2610.8C Mercury Thermometer, High Distillation, -2 to 400 Deg. C Range, 15.25 Inch Length
- QUANTUM STORAGE SYSTEMS WR54-1842P Wire Shelving, Starter Unit, 4 Shelves, 18 x 42 x 54 Inch Size, Proform Green Epoxy
- JESCRAFT WB-200PL-2R2S Drywall Cart, Full Wrap-Around Bumper, 3000 lbs. Capacity, 2 Rigid, 2 Swivel Casters
- GATES 734203035
- APPROVED VENDOR U51041.011.0100 Socket Head Cap Screw, 4-48 Thread Size, Cyl., 1 In Lg., 1/8 In Head Ht., Pln
- CONRADER SRH250-14-150 SST Air Safety Valve, With Hard Seat Valve Type
Explore More
- CONRADER
- EXCELON
- KEYSHAFT
- MOYNO
- STAHLIN
- Ball Screw Support Bearings
- Air Compressor Motors
- Hand Dryer Accessories
- Paint Applicators
- Aluminum Tread Plate
- PROTO Flex Impact Socket, 1/4 Inch Drive Size
- LOUISVILLE FS1500 Series Fiberglass Step Ladders
- HELICOIL High Spiral Flute Bottoming Taps, UNC, 2B
- CHICAGO PNEUMATIC CP7763/CP7773 Series Impact Wrenches
- HEDLAND Flow Meters For Air And Other Compressed Gases
- BRADY Banding Tape, Orange
- GLEASON Flat Electrical Cable
- APPROVED VENDOR Sidewall/ceiling Register
- EATON Danfoss FCV6-16 Series Flow Control Valves
- FATH INC 40 Series End Caps
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C33792 0 Square End Mill, Center Cutting, 2 Flutes, 1 Inch Milling Dia, 1 1/2 Inch Cut
€131.50 /unit