CLEVELAND C33402 Square End Mill, Center Cutting, 4 Flutes, 1 1/2 Inch Milling Dia, 4 Inch Cut
Get it by Tuesday, Sep 1
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Square End Mill |
| Cast Iron (k) Compatibility | Yes |
| Chip Breaker | No |
| Cutting Direction | Right Hand |
| Cutting Direction-machining | Right Hand |
| Cutting Length | 4" |
| Cutting Type | Center Cutting |
| Dimensions Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center Cutting |
| End Mill Style | Square |
| End Type | Single End |
| Finish | Tin |
| Finish-machining | Tin |
| Grade | General Purpose |
| Hardened Compatibility | No |
| Helix Angle | 30° |
| List Number | HG-4C-TN |
| Material | High Speed Steel |
| Material Grade-machining | General Purpose |
| Material-machining | High Speed Steel |
| Milling Dia. | 1 1/2" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| No. Of Flutes | 4 |
| Non Ferrous (n) Compatibility | Yes |
| Overall Length | 6 1/2" |
| Primary Material Application | Cast Iron, Steel |
| Primary Material Application Iso Code | K, P |
| Shank Dia. | 1" |
| Shank Type | Weldon |
| Shank Type-machining | Weldon Flat |
| Single End/double End | Single End |
| Stainless Compatibility | No |
| Steel (p) Compatibility | Yes |
| Super Alloy (s) Compatibility | No |
| System Of Measurement | Imperial |
Shipping Info:
| Ship weight (kg) | 0.84 |
| Ship height (cm) | 4.5 |
| Ship length (cm) | 16.99 |
| Ship width (cm) | 4.5 |
| Country of Origin | US |
Product Variants
| Product | Model | Shank Dia. | Primary Material Application | Primary Material Application Iso Code | Cutting Length | Milling Dia. | Finish-machining | Finish | No. Of Flutes | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C38916 | 1 1/4" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/2" | TiCN | TiCN | 2 | €334.71 | |
 |
C33799 | 1" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/2" | Tin | Tin | 2 | €319.12 | |
|
C38915 | 1" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/2" | TiCN | TiCN | 2 | €334.71 | |
|
C33800 | 1 1/4" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/2" | Tin | Tin | 2 | €319.12 | |
|
C33796 | 1" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/4" | Tin | Tin | 2 | €238.92 | |
 |
C38911 | 7/8" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/4" | TiCN | TiCN | 2 | - | RFQ
|
 |
C38912 | 1" | Cast Iron, Steel | K, P | 1 5/8" | 1 1/4" | TiCN | TiCN | 2 | €254.81 |
Explore Products
- GROVE GEAR EL8180020.00 EL-B818-40-R Right Angle Gear Reducer, 40 to 1 Reduction Ratio, 43 RPM Output, 634 lb-in Torque, Aluminum
- APPROVED VENDOR M12910.300.0001 Hex Locknut, M30x3.5 Thread Size, Top Lock Distorted Thread, 48mm Hex Wd., Class 10
- NOTRAX 141C0048GY696 Drying & Cleaning Entrance Mat, 4 ft. X 58 ft., Gray
- KETT TOOLS 60-21 Center Blade
- SCHNEIDER ELECTRIC 9001KT38LR Push - Test Pilot Light Red Led
- EATON XTCE032C10Y Iec Contactor, Full Voltage, 48 VAC V Coil, 3P, Non-Reversing
- TEADIT CGF1500.018.4.300 Full Face Cut Gasket, 1500, 1/8 Inch Thickness, 4 Inch Size, 300# Class
- MAIN FILTER INC. MF0386761 ST425 Hydraulic Filter, Wire Mesh, 25 Micron Rating, Buna Seal, 7.48 Inch Height
Explore More
- COFFING HOIST
- COSCO
- CYALUME TECHNOLOGIES
- KEYSHAFT
- SNOWPLOW AFTERMARKET MANUFACTURING
- Motor Driven and Hand Crank Hose Reels
- Parts Washers
- Track Saw Accessories
- Cut-Resistant Sleeves
- Pressure Washer Motors
- MCR SAFETY BearKat Series, Wraparound Frame Safety Glasses
- ANSELL 32-125 Hynit Abrasion Resistant Gloves
- NORTH BY HONEYWELL RU6500 Series Silicone Full Facepiece Respirators with 5 Point Harnesses
- RUD CHAIN LRBS-FIX Lashing Load Rings
- JOHN GUEST Swivel Male Elbows, NPTF Thread, Acetal Gray
- APPROVED VENDOR Brass Inline Ball Valve, FNPT x MNPT
- PARKER Bulkhead Unions
- ANVIL Turnbuckles
- DAKE CORPORATION Movable Table Hydraulic Presses
- HAMMOND 1455ZT Series Wall Mount Extruded Aluminum Enclosures
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C33402 Square End Mill, Center Cutting, 4 Flutes, 1 1/2 Inch Milling Dia, 4 Inch Cut