FREE delivery on orders over €150
CLEVELAND C32681 Cobalt End Mill 1/2 Inch Diameter 2 Inch Cut L
Item: AC4YCFModel: C32681Cross Ref: 31C148
7 In Stock
Ships within 2 days via
10.00% off
€66.52 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Cobalt End Mill |
| Chip-breaker | No |
| Corner Radius | 4" |
| Cutting Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Cutting Length | 2" |
| Cutting Type | Center |
| Diameter | 1/2" |
| Dimension Type | Fractional Inch |
| Drilling Tool Configuration | Individual |
| End Mill Application | Finishing |
| End Mill Style | Square |
| End Style | Square |
| End Type | Single End |
| Grade | General Purpose |
| Helix Angle | 30° |
| Material | Cobalt |
| Material Grade - Machining | General Purpose |
| Milling Dia. | 1/2" |
| Neck Dia. | Not Applicable |
| Neck Length | Not Applicable |
| Number Of Flutes | 4 |
| Overall Length | 4" |
| Primary Material Application | Stainless Steel, Steel |
| Primary Material Application Iso Code | M, P |
| Shank Dia. | 1/2" |
| Shank Type | Weldon Flat |
| System Of Measurement | Fractional Inch |
Shipping Info:
| Ship weight (kg) | 0.09 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 12.09 |
| Ship width (cm) | 2.54 |
| HS code | 8466100175 |
| Country of Origin | US |
Product Variants
| Product | Model | Number Of Flutes | Shank Dia. | Milling Dia. | Overall Length | Finish | List Number | End Type | End Mill Application | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
C32833 | 2 | 3/8" | 9/64" | 3 1/8" | Bright | - | Double End | Finishing | €44.89 | |
 |
C32851 | 2 | 3/8" | 3/16" | - | Tin Coat | HDC-2-TN | Double | Finishing | €60.68 | |
|
C32859 | 2 | 3/8" | 5/16" | 3 1/2" | Tin Coat | HDC-2-TN | Double | Finishing | €61.56 | |
|
C32841 | 2 | 1/2" | 25/64" | 4 1/8" | Bright | - | Double End | Finishing | - | RFQ
|
|
C32867 | 2 | 1/2" | 7/16" | 4 1/8" | Tin Coat | HDC-2-TN | Double | Finishing | €86.13 | |
|
C32871 | 2 | 1/2" | 1/2" | 4 1/8" | Tin Coat | HDC-2-TN | Double | Finishing | €84.05 | |
 |
C32941 | 4 | 3/8" | 1/8" | 3 1/16" | - | - | Double End | Finishing | €60.45 |
Explore Products
- SMC VALVES ARM5SA-18-AZ Manifold Regulator, Port
- VULCAN HART 720502 Solenoid Coil, 240V
- SPEC C02400420440M Compression Spring, 123 lbs/In Stiffness Rate, 14.39 lbs Load Capacity, Carbon Steel
- MAIN FILTER INC. MF0592709 Interchange Hydraulic Filter, Glass, 3 Micron Rating, Viton Seal, 9.45 Inch Height
- SPEARS VALVES PD-800-200C-10 Pipe, 10Ft. Length, Schedule 80, 20 Inch Size, CPVC
- GRAINGER 13328_24_0 Flat Bar Stock, 7075, 1 1/2 Inch x 24 Inch Nominal Size, 0.75 Inch Thick, T651
- SIOUX CHIEF 869-S4P Back Water Valve, 4 in, HubxSolvent Weld, PVC Body
- TB WOODS G2FRB Gear Coupling Hub, 2Fx1/2 Size
Explore More
- BAW PLASTICS
- KERICK VALVE
- KEYSHAFT
- KONTROL KUBE
- SPEX SAMPLEPREP
- Sink Accessories
- Flare Nut Wrench Sets
- Trash Pickers and Grabbers
- Ground Rods
- Tool Post Grinder Accessories
- ROLL PRODUCTS Hazardous Chemical Labels
- CONDOR General Purpose Chemical Resistant Orange Gloves
- MUELLER INDUSTRIES 862 Carbon Steel Y Strainers
- HEDLAND Flow Meters For Air And Other Compressed Gases
- LIFT-ALL Chain Length 20 Feet
- IIG Insulation Calcium Silicate
- SPEARS VALVES PVC Hose Swivel Adapters
- GREENLEE Batteries
- KMC CONTROLS Sensing Probes
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C32681 Cobalt End Mill 1/2 Inch Diameter 2 Inch Cut L
€73.91 /unit