CLEVELAND C16826 Taper Length Drill Bit, 9.50mm Drill Bit Size, 115.00mm Flute Length, 9.50mm Shank Dia
Get it by Tuesday, Dec 23
€57.24 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Coolant Fed | Non Coolant Through |
| Cutting Direction | Right |
| Decimal Equivalent | 0.374 |
| Depthdia. Ratio | 10xd |
| Drill Bit Point Angle | 135° |
| Drill Bit Point Type | Split Point |
| Drill Bit Size | 9.5 mm |
| Drill Diameter Tolerance | -0.001" to 0" |
| Drill Length Class | Taper Length |
| Drill Point Length | 0.0775 mm |
| Finish - Machining | Straw, Bronze |
| Flute Length | 115 mm |
| Flute Type | Parabolic |
| Helix Angle | 35°, 45° |
| Material - Machining | Cobalt |
| Material Grade - Machining | Grade M42 |
| Maximum Drilling Depth | 115 mm |
| Measurement System | Metric |
| Number Of Flutes | 2 |
| Overall Length | 175 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Copper |
| Primary Material Application Iso Code | N |
| Shank Dia. | 9.5 mm |
| Shank Length | 60 mm |
| Shank Type - Machining | Straight |
| Spiral Direction | Right Hand |
Shipping Info:
| Ship weight (kg) | 1.13 |
| Ship length (cm) | 17.5 |
| Country of Origin | US |
Explore Products
- INGERSOLL-RAND Y327-124 O Ring, Black
- SPEARS VALVES 888-480CP Nipple, Plain End, Schedule 80, 2-1/2 Inch x 48 Size, CPVC
- OSG 403-0787-BN Ball End Mill, 3 Flutes, 2 mm Milling Dia, 7 mm Length Of Cut
- BROWNING 386474 WORM SHAFT 20GW 40:1 Worm Shaft
- ADVANCE TABCO MG-302 Work Table, 24 X 30 Inch Size 16 Ga 304 Ss Top
- BATTALION 2MDG9 Door Reinforcer H 9 x W 4 3/4 In
- VOLKEL 27086-1 Hand Tap Rougher, DIN 352/HSS-G, M 42 x 4.5 LH Size
- SIEMENS 3RH21311SB40 Iec Control Relay, 24 V Dc Coil Volt
Explore More
- DOLPHIN COMPONENTS CORP
- KEYSHAFT
- PORT-A-COOL
- V1K FILTERS
- AIGNEP
- Copper Blanks Flats Bars Plates and Sheet Stock
- Sanding Cross Pads
- Puller/Separator Sets
- Pilot Air Control Valves
- Railroad Spill Containment
- HI TEMP Welding Blanket Roll
- DWYER INSTRUMENTS RTD Series Resistance Temperature Detectors
- CONDOR Coated Gloves, Nitrile, Palm Dotted/Double Dipped
- KEO Center Reamers, 3-Flute
- DEWALT Depressed Center Wheels
- BROWNING Super B Series Gripbelts
- DEWALT Spray Wands
- SCIENTIFIC CUTTING TOOLS Single Profile Thread Mills
- PARKER 164CA Series Compress-Align Union Tees
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLEVELAND C16826 Taper Length Drill Bit, 9.50mm Drill Bit Size, 115.00mm Flute Length, 9.50mm Shank Dia
€57.24 /unit