FREE delivery on orders over €150
CLE-LINE C28425 Silver and Deming Drill, 1 5/64 Inch Drill Bit Size, 3 1/8 Inch Flute Length
Item: CX7MBRModel: C28425Cross Ref: 807NV6
7 In Stock
Ships within 2 days via
10.00% off
€117.20 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Cutting Direction | Right |
| Decimal Equivalent | 1.0781 |
| Drill Bit Point Angle | 118° |
| Drill Bit Point Type | Radial Point |
| Drill Bit Size | 1 5/64" |
| Drill Diameter Tolerance | -0.0015" to 0" |
| Finish - Machining | Steam Oxide |
| Flute Length | 3 1/8" |
| Flute Type | Spiral |
| Material - Machining | High Speed Steel |
| Maximum Drilling Depth | 3 1/8" |
| Measurement System | Decimal Inch |
| Number Of Flutes | 2 |
| Overall Length | 6" |
| Primary Material Application | Alloy Steel, Carbon Steel, Gray Cast Iron, Low Carbon Steel, Nodular Cast Iron |
| Primary Material Application Iso Code | K, P |
| Shank Dia. | 1/2" |
| Shank Length | 2 1/4" |
| Silver & Deming Drill | Yes |
| Spiral Direction | Right Hand |
Shipping Info:
| Ship weight (kg) | 0.35 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 15.24 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Explore Products
- SEALMASTER USFB5000E-300-C Flange Block Bearing, 4 Bolt Square Flange Block, 3 Inch Bore, 7.9 Inch Bolt Dia
- LEGRIS 0205 21 00 Internal Hex Head Plug, Brass, 1/2 Inch Size Fitting Pipe Size, Male BSPT
- DYNABRADE 11041
- PARKER N3657564753
- BALDOR / DODGE 120410 SDS X 1-7/8 KW SDS X 1-7/8 Keyway QD Bushing
- MICRO 100 QTH-405L Tool Holder, 1 Inch Shank Dia., 1.062 Inch Head Dia., 0.1875 Inch Internal Dia.
- MAIN FILTER INC. MF0603952 W03AT1279 Interchange Hydraulic Filter, Wire Mesh, 150 Micron Rating, Buna Seal, 6.26 Inch Height
- COOPER B-LINE BL244359 Extension Cable
Explore More
- AVEN
- KEYSHAFT
- METRO
- SHURFLO
- WORLDWIDE ELECTRIC
- Flame Resistant and Arc Flash Hats and Headwear
- Photoelectric Sensor Reflectors
- Deck Screws
- Rebar Locators
- Condiment Self-Serve Center Accessories
- NIROFLEX USA Niroflex2000 Cut Resistant Gloves, Wrist Length
- NORTH BY HONEYWELL Northflex Light Task Plus 5 General Purpose Gloves
- DESTACO 375-M Series Pull Action Latch Clamps
- TYGON 2375 Chemical Resistant PVC Tubings
- ANVIL C150 Series Cable Eyelets
- PETERSEN PRODUCTS Pressure Gauge
- KERN AND SOHN ORA-H Series Analog Refractometers
- WESTWARD Microfiber Cloths
- BROWNING U0 Type, Split Taper Bushings
- KLEIN TOOLS Super-Long Nut Drivers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CLE-LINE C28425 Silver and Deming Drill, 1 5/64 Inch Drill Bit Size, 3 1/8 Inch Flute Length
€130.21 /unit