CENTURY F352V2 Direct Drive Blower Motor, 1 Speed, Resilient Base Mount, 1/2 HP
Get it by Friday, Aug 21
€676.15 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Direct Drive Blower Motor |
| Body Dia. | 6 4/5" |
| Capacitor Required | Capacitor Not Required |
| Electrical Phase | 1 |
| Enclosure | Teao |
| Enclosure Type | Totally Enclosed Air Over |
| Frame Type | 56 |
| Frequency | 60 Hz |
| Full Load Amps | 7.1A |
| Hp | 1/2 hp |
| Insulation Class | Class B |
| Motor Design | Split-Phase |
| Motor Enclosure Design | Totally Enclosed Air Over |
| Motor Mounting Type | Cradle Base |
| Motor Service Factor | 1 |
| Motor Shaft Rotation | CW, CCW |
| Motor Thermal Protection | Auto |
| Nameplate Speed | 1725 RPM |
| No. Of Speeds | 1 |
| Nominal Voltage | 115V AC |
| Phase | 1 |
| Shaft Dia. | 5/8" |
| Shaft Length | 1 7/8" |
| Speed | 1450-1800 RPM , 1700-1800 RPM |
| Usable @ 208 V | No |
| Voltage | 115V , 115V AC |
Shipping Info:
| Ship weight (kg) | 12.49 |
| Ship height (cm) | 26.92 |
| Ship length (cm) | 33.53 |
| Ship width (cm) | 25.91 |
| Country of Origin | MX |
Explore Products
- SMC VALVES NCDGUN25-0200-XC6 Round Body Cyinder, 3/4 To 2-1/2 Inch Bore Range
- CLEVELAND C76205 Square End Mill, Carbide, Single End, 3/64 Inch Milling Dia, 2 Flutes
- HUBBELL WIRING DEVICE-KELLEMS PH1004PB015 Cordset, Male/Female, 4 Wire, Length 15 Feet
- PACKAGING CORPORATION OF AMERICA 1W957 Corrugated Shelf Bin, 200 Lbs. Test Rating, White, 8 1/2 Inch x 11 Inch x 8 1/4 Inch Size
- GATES 10GTHXCTN Hydraulic Hose
- SMC VALVES 11-MHZ2-25S Air Gripper
- TY-RAP TY524M Cable Tie, 185 Deg F Temp Range, 2-Piece High Performance Standard Type, Natural
- SMC VALVES SY5100R-5UF1-W3-02N Solenoid Valve, 4/5 Port
Explore More
- KEYSHAFT
- TIVAR
- RELAY AND CONTROL CORP
- ADVANCED CABLE TIES
- ACROVYN
- Milling Cutters
- Wire Carts
- Ear Plugs
- Spring Anchors
- Drum Carrier/Rotator
- DESTACO 217 Series Horizontal Hold Down Clamps
- CHICAGO PNEUMATIC CP3850 Series Angle Wheel Grinders
- KEO Metric NC Spotting Drills
- ANVIL AS150S Series Channels With Long Slots
- ANVIL AS200H Series Channels With Holes
- APPROVED VENDOR 72" Length Rectangular Oversized Machine Key
- CONDOR Back Supports With Lumbar Pads, Nylon
- OSG Drill Reamers for Composites
- GATES EFG6K Spiral Wire Hoses 420 Bar
- GUARDAIR HydroForce Power Wash Guns
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
CENTURY F352V2 Direct Drive Blower Motor, 1 Speed, Resilient Base Mount, 1/2 HP
€676.15 /unit