BALDOR MOTOR VLECP4108T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 30 hp, TEFC, 286LP Frame
Get it by Tuesday, Sep 1
€13,009.52 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 34A |
| Amps @ Voltage | 34A @ 460V, 68A @ 230V , 68A @ 230V, 34A @ 460V |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | None |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Blower | None |
| Break Down Torque | 135 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 6 |
| Design Code | B |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 91.7% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 286LP |
| Frame Material | Iron |
| Frame Size | 286LP |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 34A |
| Hp | 30 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Duty |
| Kva Code | G |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 5400 RPM |
| Max. Speed | 5400 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 10 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 1048M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Speed | 3525 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 2 |
| No. Of Speeds | 1 |
| Output Frequency | 30 hp @ 60 Hz |
| Overall Length | 32.44" |
| Phase | 3 |
| Power Factor | 90 |
| Product Datasheet | baldor-motor-vlecp4108t.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rodent Screen | Not Available |
| Service Factor | 1.15 |
| Shaft Dia. | 1 3/4" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | Shaft Slinger |
| Speed | 3400-3600 RPM , 3525 RPM |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Speed @ Hz | 3600 RPM @ 60 Hz |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Type | 1048M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| Xp Class And Group | None |
| Xp Division | Division II |
| Xp Temp. Code | T3 |
Shipping Info:
| Ship weight (kg) | 180 |
| Ship height (cm) | 87 |
| Ship length (cm) | 88.9 |
| Ship width (cm) | 85.09 |
| HS code | 85015230 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VLCP4108T
- Constant Torque Speed Range: 6
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 91.70%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter duty
- KVA Code: G
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 10 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 47 LB-FT
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 1.750 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Starting Current: 212 A
- Temp. Rise @ Rated Load: 69 deg C
- Temp. Rise @ S.F. Load: 85 deg C
Documentation:
Explore Products
- ANSELL 11-645 Cut Resistant Glove, 2Xl, Ansi Cut Level A4, Palm, Low Dmf Polyurethane, Gray, 1 Pr
- STARRETT 95406-08-10 Band Saw Blade Coil Stock, Carbide Grit, 3/8 Inch width, 8 Ft. 10 Inch Coil
- CYTIVA WHATMAN 6720-5045 Polydisc Filter, 50 mm Dia, 0.45 Um Pore Size, Ptfe Membrane, Autoclavable
- SMC VALVES CA2WB50-413Z Tie Rod Cylinder
- SMC VALVES CDQ2A50-80DZ-XB10 Compact Cylinder, 50Mm Bore Size, 80 Mm Stroke Length
- APOLLO VALVES 76507P01 2 Pcs Standard Port SS Ball Valve with Spring Return Handle, 1-1/2 Inch, 2 x FNPT, silver, 9 x 2 x 3 Inch
- BOSCH U101BF Blade, 4 Inch Size, 10TPI Bi-Metal Shank Blade
- SPEARS VALVES SAEK-030-480 Service Access Extension Kit, 48 Inch Height, 3 Size, PVC
Explore More
- GILMOUR
- KEYSHAFT
- TURNSTILE
- ESAB
- HEIL QUAKER
- Tool Storage Accessories
- Cascade Airline Kits and Manifolds
- Receptacle and Switch Wiring Modules
- Power Meters and Analyzers Accessories
- Rod and Piston Seal Kits
- AKRO-MILS 33105 Akro Grid Dividable Plastic Storage Boxes
- OIL SAFE Stumpy Spout Lids
- RUD CHAIN INOX-STAR Stainless Steel Eye Bolts, Metric
- MUELLER INDUSTRIES 782 Stainless Steel Y Strainers
- ANVIL AS3064 Series Post Bases
- RAIN BIRD 1/2" FNPT Spray Head for Shrubs
- SPEARS VALVES PVC Class 100 IPS Fabricated Crosses, Socket x Socket x Socket x Socket
- EATON EG Series Molded Case Switches, EG Frame
- APPROVED VENDOR 3/8"-24 Fully Threaded Passivated Grade 18-8 Stainless Steel Hex Head Cap Screws
- TUNGALOY VST Type Solid End Mill Shanks
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP4108T Vertical P-Base Motor, 230/460V, 3600 RPM, 60 Hz, 30 hp, TEFC, 286LP Frame
€13,009.52 /unit