BALDOR MOTOR VLECP3774T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 10 hp, TEFC, 215LP Frame
Get it by Monday, Dec 22
€6,238.29 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Vertical Pump Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 12.5A |
| Amps @ Voltage | 12.5A @ 460V, 25A @ 230V |
| Amps @ Volts | 25A @ 230V, 12.5A @ 460V |
| Auxillary Box | No Auxillary Box |
| Base Type | Not Applicable |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Break-down Torque | 87 lbs.-ft. |
| Conduit Box Material | Cast Iron |
| Conduit Box Position | F1 |
| Constant Torque Speed Range | 1.3 |
| Design Code | A |
| Drip Cover | Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 92.4% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | TEFC |
| Feedback Device | NO FEEDBACK |
| Frame | 254LP |
| Frame Material | Iron |
| Frame Size | 215LP |
| Frequency | 60 Hz |
| Front Face Code | Drip Cover Mounting |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 12.5A |
| Hp | 10 hp |
| Insulation Class | Class F |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Lifting Lugs | Vertical Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max. Ambient Temp. | 40°C |
| Max. Motor Speed | 2700 RPM |
| Max. Rpm | 2700 RPM |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 9 @ 14 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Mounting Type | Vertical Lifting Lugs |
| Motor Type | 0748M |
| Mounting Type | Vertical Lifting Lugs |
| Nameplate Rpm | 1760 RPM |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 10 hp @ 60 Hz |
| Overall Length | 22.51" |
| Phase | 3 |
| Power Factor | 82 |
| Product Datasheet | baldor-motor-vlecp3774t.pdf |
| Product Family | Super-E Chemical Processing |
| Pulley End Bearing Type | Thrust |
| Pulley Face Code | P Base |
| Pulley Shaft Indicator | P Base Groove, Key |
| Rpm | 1760 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | Single Speed |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Type | 0748M |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 230/460V |
| Voltage @ Frequency | 460V @ 60 Hz, 230V @ 60 Hz |
| Xp Division | Division II |
| Xp Temp Code | T3C |
Shipping Info:
| Ship weight (kg) | 103.95 |
| Ship height (cm) | 44.77 |
| Ship length (cm) | 72.71 |
| Ship width (cm) | 46.04 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- SUPERSEDES BALDOR - VLCP3774T
- Constant Torque Speed Range: 1.3
- Drip Cover: Drip Cover
- Efficiency @ 100% Load: 92.40%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: H
- Lifting Lugs: Vertical Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- No-Load Current: 0 A
- Product Family: Super-E Chemical Processing
- Pull-Up Torque: 51.9 LB-FT
- Pulley End Bearing Type: Thrust
- Pulley Face Code: P-Base
- Pulley Shaft Indicator: P-Base Groove & Key
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 88.5 A
- Temp. Rise @ Rated Load: 60 deg C
- Temp. Rise @ S.F. Load: 76 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Nameplate Rpm | Frame | Insulation Class | Type | Amps | Power Factor | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| VLECP2333T | 230/460V | 15 hp | 1765 RPM | 254LP | Class F | 0944M | 18.1A | 84 | €8,523.44 | |
| VLECP2334T | 230/460V | 20 hp | 1770 RPM | 256LP | Class F | 0960M | 24A | 83 | €8,833.94 | |
| VLECP2394T | 230/460V | 15 hp | 3510 RPM | 254LP | Class F | 0934M | 17A | 91 | €8,798.91 | |
| VLECP3660T | 230/460V | 3 hp | 3500 RPM | 182LP | Class F | 0628M | 3.4A | 92 | €4,758.70 | |
| VLECP3661T | 230/460V | 3 hp | 1755 RPM | 182LP | Class F | 0632M | 4.1A | 77 | €4,864.72 | |
| VLECP3663T | 230/460V | 5 hp | 3490 RPM | 184LP | Class F | 0632M | 5.7A | 90 | €5,238.64 | |
| VLECP3665T | 230/460V | 5 hp | 1750 RPM | 184LP | Class F | 0642M | 6.6A | 80 | €4,903.54 |
Explore Products
- CLEVELAND C32694 0 Square End Mill, Bright Finish, Center Cutting, 4 Flutes, 11/32 Inch Milling Dia
- HYDRO VACUUM EZ3 L/D=60/28 Flexible Jaw Coupling, Length 60 Inch, Diameter 28 Inch
- MAIN FILTER INC. MF0430753 300287 Interchange Hydraulic Filter, Glass, 10 Micron Rating, Viton Seal, 12.28 Inch Height
- STAFFORD MFG 2S300HD Shaft Collar, Heavy Duty, 2 Piece Split, 3 Inch I.D., SS
- TEADIT S1701GR.116.66 Gasket Sheet, GR1701, 1/16 X 60 X 60 Inch Size, Stainless Foil Reinforced Graphite
- WORLDWIDE ELECTRIC WINL107-20/1-284/6TC Speed Reducer, Inline Helical Gear, Box Size 107, 20:1 Ratio, 284/6TC Frame
- VERMONT GAGE 141139970 Plug Gage, Class X, Go, Steel, 0.3997 Inch Size
- GRAINGER ZUSA-FRS-115 Silicone Sheet, Flame-Resistant, 12 x 24 Inch Size, 1/16 Inch Thickness, Blue, Closed Cell
Explore More
- KEYSHAFT
- ZIAMATIC CORP
- FRYMASTER
- TAPCO CUTTING TOOLS
- TEKTON
- Nut Setters and Bit Holders
- HVAC Brushes
- Blower and Fan Accessories
- Temperature Controlled Rooms
- Grease Feeder Accessories
- MEMPHIS GLOVE NXG Gray PU Work Gloves
- CHICAGO PNEUMATIC Air Cut-Off Tools
- JOHN GUEST Metric Stem Adapters, BSPP Thread, Acetal Black
- MUELLER INDUSTRIES 101MHT Silent Check Valves
- SPEARS VALVES PVC Tee Style Zero Dead Leg Ball Valves, Mainline Socket Tee x Valve Socket/Fipt, FKM, Metric
- GROTE Main Harness
- APPLETON ELECTRIC Control Station Covers
- GROVE GEAR GRG Series, HMQ-H1 Style, 821 Size, Ironman Worm Gear Reducers
- ACME ELECTRIC Three Phase Buck Boost Transformers, 240V Primary Volts
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR VLECP3774T Vertical P-Base Motor, 230/460V, 1800 RPM, 60 Hz, 10 hp, TEFC, 215LP Frame
€6,238.29 /unit