BALDOR MOTOR EM2513T-8G Three Phase Motor, 200V, 1800 RPM, 60 Hz, 15 hp, ODP, 254T Frame
Get it by Tuesday, Dec 23
€4,146.23 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | HVAC Motor |
| Ambient (c) | 40 deg C |
| Ambient Temp. | 40°C |
| Amps | 41A @ 200V, 40A @ 208V |
| Amps @ Voltage | 40.5A @ 208V, 40.7A @ 200V |
| Amps @ Volts | 41A @ 200V, 40A @ 208V |
| Auxillary Box | No Auxillary Box |
| Base Indicator | Rigid |
| Base Type | Rigid Base |
| Bearing Grease Type | Polyrex EM (-20°F +300°F) |
| Bearing Type | Ball |
| Break-down Torque | 145 lbs.-ft. |
| Conduit Box Material | Steel |
| Conduit Box Position | F1 |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty | Continuous |
| Duty Cycle | Continuous |
| Efficiency @ 100% Load | 93% |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Enclosure Design | OPSB |
| Enclosure Type | Open Slotted Band |
| Feedback Device | NO FEEDBACK |
| Frame | 254T |
| Frame Material | Steel |
| Frame Size | 254T |
| Frequency | 60 Hz |
| Front Face Code | Standard |
| Full Load Amps | 41A |
| Full Load Torque | 0 LB-FT |
| Grease Type | Polyrex EM |
| Heater Indicator | No Heater |
| High Voltage Full Load Amps | 40.7A |
| Hp | 15 hp |
| Insulation Class | Class H |
| Inverter Code | Inverter Ready |
| Kva Code | H |
| Length | 23 1/5" |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Quantity/wire Size | 3 @ 8 AWG |
| Motor Lead Termination | Flying Leads |
| Motor Shaft Rotation | Clockwise/Counter Clockwise |
| Motor Type | 3938M |
| Mounting Type | Foot Mounted |
| Nema/iec | NEMA |
| No. Of Poles | 4 |
| No. Of Speeds | 1 |
| Output @ Frequency | 15 hp @ 60 Hz |
| Overall Length | 23.19" |
| Phase | 3 |
| Power Factor | 85 |
| Product Datasheet | baldor-motor-em2513t-8g.pdf |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rpm | 1765 RPM |
| Rpm Range | 1700-1800 RPM |
| Service Factor | 1.15 |
| Shaft Dia. | 1 5/8" |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed Type | 1 |
| Start Type | Direct On Line |
| Synchronous Rpm | 1800 RPM |
| Synchronous Rpm @ Frequency | 1800 RPM @ 60 Hz |
| Synchronous Speed | 1800 RPM |
| Thermal Protection | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Voltage | 200V |
| Voltage @ Frequency | 200V @ 60 Hz |
| Xp Division | Not Applicable |
Shipping Info:
| Ship weight (kg) | 105.3 |
| Ship height (cm) | 44.29 |
| Ship length (cm) | 68.58 |
| Ship width (cm) | 52.07 |
| HS code | 85015220 |
| Country of Origin | US |
Product Details:
- Drip Cover: No Drip Cover
- Efficiency @ 100% Load: 93.00%
- Electrically Isolated Bearing: Not Electrically Isolated
- Inverter Code: Inverter ready
- KVA Code: H
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: KO Box
- Motor Lead Quantity/Wire Size: 3 @ 8 AWG
- No-Load Current: 0 A
- Product Family: General Purpose
- Pull-Up Torque: 62.18 LB-FT
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Shaft Diameter: 1.625 in
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Starting Current: 277 A
- Temp. Rise @ Rated Load: 26 deg C
- Temp. Rise @ S.F. Load: 32 deg C
Documentation:
Product Variants
| Model | Voltage | Hp | Frame | Rpm Range | Motor Design | Nameplate Rpm | Motor Application | Shaft Length | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| EM2506T-BG | 230/460V | 7 1/2 hp | 254T | 1100-1200 RPM | - | - | - | - | €3,121.03 | |
| EM2506T-G | 230/460V | 7 1/2 hp | 254T | 1100-1200 RPM | Three Phase | - | - | - | €3,167.42 | |
| EM2511T-BG | 230/460V | 10 hp | 256T | 1100-1200 RPM | - | - | - | - | €3,937.03 | |
| EM2511T-G | 230/460V | 10 hp | 256T | 1100-1200 RPM | Three Phase | - | - | - | €3,984.35 | |
| EM2513T-BG | 230/460V | 15 hp | 254T | 1700-1800 RPM | - | - | - | - | €4,099.85 | |
| EM2513T-G | 230/460V | 15 hp | 254T | 1701-1800 RPM | 3-Phase | 1770 RPM | General Application | 4" | €6,218.84 | |
| EM2514T-G | 230/460V | 20 hp | 254T | 3400-3600 RPM | Three Phase | - | - | - | €4,201.13 |
Explore Products
- MARTIN SPROCKET D200B26 Sprocket, 200 Chain, 26 Teeth, 20.741 Inch Pitch Dia., 22.089 Inch O.D., Steel
- PIP 34-315/L Hand Protection Seamless Glove Coated, L, Green, Dozen
- WIHA TOOLS 01130 WIHA 01130
- TENSABARRIER 889F-28-28-STD-NO-G6X-C Fixed Barrier Post With Belt, Steel, Green, 36 1/2 Inch Post Height, 2 1/2 Inch Post Dia
- BROWNING J50SS-2 O/S C/L Roller Chain Offset Link
- PETERSEN PRODUCTS 147-0100-P80M Test Plug, High Pressure Test, 9.38 Inch Diameter, 1 Inch NPT Bypass Size
- TECHNIKS 05958-1/4 Collet, Round Face, 1/4 Inch Size
- DIXON BFC400 Flow Control Valve, 1/4 Inch Thread, 2000 PSI
Explore More
- KEYSHAFT
- POWER DRIVE
- WAHL
- QUIETCOOL
- ODE
- Condiment Self-Serve Centers
- Wrist Supports and Wraps
- Table Saw Accessories
- Combination Units
- Tool Posts
- LOC-LINE In-line Check Valve
- DESTACO 95030, 95040, 95050, 95060 Series Straight Line Action Clamp
- HELICOIL Straight Flute Bottoming Taps, 2B
- KEO Combined Drills And Countersinks, Bell Type, 60 Degrees Countersink Angle
- EQUIPTO Open Metal Shelving
- MI-T-M After Coolers
- ARO 600 Series Circuitry Valves
- GAST 2AM Series Air Motors
- SPEC Metric Compression Springs, Music Wire, 2.25 mm Outside Dia.
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR MOTOR EM2513T-8G Three Phase Motor, 200V, 1800 RPM, 60 Hz, 15 hp, ODP, 254T Frame
€4,146.23 /unit