BALDOR / DODGE SS26Q25L14 Gearbox, 2.63 Inch Center Distance, 25 Ratio, 1677 in-lb Rated Torque, Case Size 26, Left Output, 1.86 HP Output Power
€3,483.55 /unit
Request a Quote
Payment
Delivery
Product Specifications:
| Base To Output Center Height | 2.87" |
| Case Size | 26 |
| Center Distance | 2.63" |
| Center To End Of Shaft Distance | 5.63" |
| Centre Distance | 2.62" |
| Efficiency | 60% to 95% |
| Gear Ratio | 25:1 |
| Gearbox Component Type | Gearbox |
| Housing Material | Stainless Steel |
| Hp | 3 hp |
| Input Flange | 140TC |
| Input Hp | 2 13/50 hp |
| Input Style | Quill |
| Input Type | Quill |
| Key Way Size | 2.35" x 1/4" x 1/4" |
| Length | 9.37" |
| Lubrication Type | PAG, Standard Temperature , Synthetic Oil |
| Material | Stainless Steel |
| Max. Input Speed | 1750 RPM |
| Max. Output Speed | 70 RPM |
| Motor Compatibility | NEMA Motor, 140TC Frame |
| Mounting Bolt Pattern Length | 6.38" |
| Mounting Bolt Pattern Width | 3.38" |
| Nominal Ratio | 25 |
| Output Hp | 1 43/50 hp |
| Output Shaft Center To Input Motor Mounting Face Distance | 5.51" |
| Output Size | 1 1/8" |
| Output Style | Left |
| Output Type | Solid A Shaft |
| Overhung Load | 1610 lbf. |
| Paint/coating | No |
| Rated Torque Output | 1677 lbs.-in. |
| Ratio | 25:1 |
| Rotation Type | Left Hand |
| Seal Type | Two Piece Harsh Duty |
| Shaft Dia. | 1 1/4" |
| Shaft Dia. Output | 1 1/8" |
| Shaft Length Output | 2.67" |
| Shaft Output Type | Left Side Solid |
| Size | 26 |
| Suitable For Washdown | Yes |
| Thermal Hp | 3 hp |
| Torque Rating | 1677 lbs.-in. |
Explore Products
- TB WOODS 4RDP480 Classical V-Belt, Diene, D Belt Type, 480.8 inch Length, 4 Ribs
- GRAINGER M07800.100.0012 Set Screw, M10x1.5 Thread Size, Pln, 12 mm Lg., 5 mm Drive Size, Cone, Hex Socket
- EKLIND 13413 Hex Key Set, Sae, Long, Plastic Holder, Gold Plated, 2 Tips
- BALDWIN FILTERS PA1858 Air Filter Element
- WOODHEAD 1200870049 483030B09M040 Cordset, 3 Pole, Female Male, 4m, 24/3 Size, PUR
- SQUARE D C66 Heater Element, 50.3-57.1 A
- STAFFORD MFG 34L106P5 Shaft Collar, Set Screw Type, 1-3/8 Inch Bore, Steel, Black Oxide
- CAMPBELL CHAIN AND FITTINGS 5413205 Anchor Shackle, 2 Inch Trade Size, Screw Pin, Painted
Explore More
- KEYSHAFT
- STANLEY
- HUBBELL LIGHTING - OUTDOOR
- R B FABRICATIONS
- CRETORS
- Cabinet Benches
- Supplied Air Accessories
- Conduit Voltage Markers
- Fixed Gas Detectors
- Pump and Cylinder Sets
- SHARPE VALVES Carbon Steel Inline Ball Valve, FNPT x FNPT
- CONDOR Chemical Resistant Sleeve Aprons
- DEVILBISS High Volume Low Pressure Spray Guns
- TIVAR UHMW Sheet Stocks, Black
- ANVIL AS714 Series Tee Plates
- VULCAN HART Close Nipple
- ROADPRO Car Fans
- APPROVED VENDOR M3 x 0.5 Fully Threaded Standard Slotted Pan PTFE Plastic Rounded Machine Screws
- MEC-O-MATIC Tubing for Chemical Metering Pumps
- DAYTON Synchronous Drive Gearbelts, 50 mm Wide
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR / DODGE SS26Q25L14 Gearbox, 2.63 Inch Center Distance, 25 Ratio, 1677 in-lb Rated Torque, Case Size 26, Left Output, 1.86 HP Output Power
€3,483.55 /unit