BALDOR / DODGE FB-SCFS-014-SHFS Ball Bearing, 7/8 Inch Bore, Fixed Non-Expansion, 1.63 Inch Bolt Center Length, 1.34 Inch Bore Length
€352.44 /unit
Request a Quote
Payment
Delivery
Product Specifications:
| Application | General Purpose |
| Bearing Type | Ball |
| Bolt Dia. | 3/8" |
| Bore Dia. | 7/8" |
| Bore Length | 1.34" |
| Duty Cycle | Standard Duty |
| Expansion | No |
| Expansion Capability | Non Expansion |
| Greasable | No |
| High Temp. | No |
| Housing Construction | Solid |
| Housing Material | Stainless Steel |
| Insert Finish | Plated |
| Insert Material | Stainless Steel |
| Insert Type | Ball Bearing |
| Locking | Set Screw |
| Lubrication Type | Grease |
| Max. Bolt To Bolt | 1.63" |
| Max. Speed | 825 RPM |
| Min. Bolt To Bolt | 1.63" |
| Relubrication | Yes |
| Seal Option | Dual Guard Seals With Flingers |
| Seal Type | Triple Lip Contact |
| Series | 205 Series |
| Shaft Attachment | Set Screw |
| Shaft Dia. | 7/8" |
| Standoff Housing | No |
| Static Load Capacity | 1769 lbf. |
| Suitable For High Temp. | No |
| Suitable For Washdown | Yes |
| Type | 3 Bolt Flange Bracket |
Explore Products
- APPROVED VENDOR 30-15375-54X36P Foam Sheet Adhesive Back 0.375 x 54 x 36 In
- INDUSTRIAL SCIENTIFIC VP5L12Y2111101 Multi-Gas Detector, IP68, Lithium Ion, LED
- GARLOCK SEALING TECHNOLOGIES dom0000050020004 RWI Spiral Wound Gasket for 20 Inch ASME B16.5 Class 400 Flange, 304/304L Stainless Steel Winding, Flexible
- MICRO 100 VLRM-160-4 End Mill, 4 Flute, Corner Radius, 16.0 mm Cutter dia
- BALDOR MOTOR CEWDM3546T-5 1Hp, 1745Rpm, 3Ph, 60Hz, 143Tc, 3524M, Tenv, F1, CEWDM3546T-5
- GRAINGER 224-001061 Ball End Mill, 2 Flutes, 1/2 Inch Milling Dia, 2 Inch Length Of Cut, 4 Inch Overall Length
- MURRELEKTRONIK 7000-44711-7960150 Receptacle Cordset, M12 Male Receptacle to Male RJ45, 1.5 m, M12 x 1, 1.5 A, IP67, IP67
- SMC VALVES VP542-5DZ1-02NA-F Valve, 3 Port Size
Explore More
- KEYSHAFT
- TOUGHSTRIPE
- KONTROL KUBE
- DRAGER
- VAST
- Bollard Covers and Post Sleeves
- Wire Rope Swage Clevis Fittings
- Convertible Well Jet Pumps
- Puller/Separator Sets
- Conveyor Accessories
- STARRETT Steel Straight Edge
- DESTACO 201 Series Vertical Hold Down Clamps
- LEATHERHEAD TOOLS Pro Lite Series Pike Poles
- MEMPHIS GLOVE Ninja BNF Work Gloves, 18 Gauge, Palm and Fingertips Coated
- MUELLER INDUSTRIES 721-N Triple Duty Control Check Valves
- AMERICAN WELDQUIP Air Cooled Mig Gun
- EATON HKD Series Molded Case Circuit Breaker Frames, K Frame
- LINN GEAR Type A Sprockets, 240 Chain
- HUBBELL Electrical Floor Box Covers
- RIP TIE Cut To Length Hook and Loop Cable Tie Rolls
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
BALDOR / DODGE FB-SCFS-014-SHFS Ball Bearing, 7/8 Inch Bore, Fixed Non-Expansion, 1.63 Inch Bolt Center Length, 1.34 Inch Bore Length
€352.44 /unit