ARCH CUTTING TOOLS S12Q SVFBR2 Boring Bar
Get it by Tuesday, Aug 25
€240.34 /unit
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Boring Bar |
| Bar Dia. | 0.750" |
| Bar Dia. | 3/4" |
| Center To Cutting Tip | 5/8" |
| Compatible Hardware | MTS-2.5L Insert Screw, T-7 Key |
| Coolant Fed | Non Coolant Through |
| Cutting Angle | 0° |
| Cutting Application | Profiling |
| Cutting Direction | Right |
| Cutting Edge Angle | 0° |
| Head Material | Steel |
| Inscribed Circle | 1/4" |
| Insert Angle | 35° , Diamond |
| Insert Clearance Angle | 5° |
| Insert Holding Type | Screw On |
| Insert Inscribed Circle | 1/4" |
| Insert Size | 21.51 |
| Insert Style | VBMT |
| Lead Angle | 0° |
| Min. Bore Dia. | 1.05" |
| Mounting Style | Screw Lock |
| No. Of Inserts | 1 |
| Overall Length | 7" |
| Rake | Positive |
| Shank Dia. | 3/4" |
| Shank Material | High Speed Steel |
| Side Cutting Edge Angle | 0° |
| Style | Solid |
| Type | Turning |
Shipping Info:
| Ship weight (kg) | 0.32 |
| Ship height (cm) | 3.18 |
| Ship length (cm) | 17.78 |
| Ship width (cm) | 3.18 |
| Country of Origin | US |
Product Variants
| Model | Min. Bore Dia. | Bar Dia. | Mounting Style | Shank Material | Shank Dia. | Insert Size | Cutting Direction | Cutting Edge Angle | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| S02.5G SCLDR1.2 | 0.175" | 0.156" | Screw Lock | - | 5/32" | 1.20.6 | Right | -5° | €112.80 | |
| S03.5G SCLDL1.5 | 0.245" | 0.218" | Screw Lock | High Speed Steel | 7/32" | 1.510 | Left | -5° | €112.80 | |
| S03.5G SCLDR1.5 | 0.245" | 0.218" | Screw Lock | High Speed Steel | 7/32" | 1.510 | Right | -5° | €112.80 | |
| S03G SCLDL1.2 | 0.205" | 0.187" | Screw Lock | High Speed Steel | 3/16" | 1.20.6 | Left | -5° | €112.80 | |
| S03G SCLDR1.2 | 0.205" | 0.187" | Screw Lock | High Speed Steel | 3/16" | 1.20.6 | Right | -5° | €112.80 | |
| S03G SWLCR1.2 | 0.205" | 0.187" | Screw Lock | High Speed Steel | 3/16" | 1.210.5 | Right | -5° | €125.47 | |
| S04G SCLDL1.5 | 5/16" | 1/4" | Screw Lock | High Speed Steel | 1/4" | 1.510 | Left | -5° | €112.80 |
Explore Products
- REGAL 008668AS53 Hand Tap, 1 1/4-12 Size, H4 Limit, 6 Flutes, Bottom With Nitride & Steam Oxide
- SMC VALVES MXQ8L-75CS Guide Cylinder, Air Slide Table
- HUMBOLDT H-3731 Scoop, One-piece Aluminum
- COOPER B-LINE 4436 HSNK Wireway, 36 x 4 x 4 Inch Size, Hinged Covered, Steel, Gray
- KILLARK VM4LC05530S5PFN Led High Bay/Low Bay, Hazardous Rated 55 W, 6960 Lumens Straight Stanchion, Polycarbonate Flat Lens
- ZURN QQUFC77GX Pex And Pipe Adapter Low Lead Brass
- ANVIL 0500018814
- CLEVELAND C60511 Corner Radius End Mill, 5 Flutes, 3/4 Inch Milling Dia, 1 Inch Length Of Cut
Explore More
- BEL-ART - SCIENCEWARE
- KEYSHAFT
- SPEEDI-BOOT
- ZEBRA SKIMMERS
- GRIT MITTS
- Corn Whisk and Angle Brooms
- Pin Assortments
- Screw Caps
- IEC Delay Timers
- Jack Screws
- ML KISHIGO Hook And Loop Mesh Vests, 4 Pocket, Orange
- CONDOR Cowhide Leather Gray Driver Gloves
- LOUISVILLE FE3100 Series Fiberglass Single Ladders
- RUD CHAIN VLBS-U-LT Load Rings For Welding
- LUMAPRO Emergency Lighting Batteries
- VOLLRATH Beveled Beaker, Stainless Steel
- APPLETON ELECTRIC 175 Watt Light Fixture
- EATON CHND Series Electronic Molded Case Circuit Breakers, NG Frame
- ZSI Cable Clamps
- APPROVED VENDOR #10-32 Fully Threaded Steel Threaded Rods
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
ARCH CUTTING TOOLS S12Q SVFBR2 Boring Bar
€240.34 /unit