FREE delivery on orders over €150
APPROVED VENDOR PT2010EW Drill Bushing Type Headless Press Fit Drill Size 4mm
Item: AA3AKFModel: PT2010EWCross Ref: 11F796
7 In Stock
Ships within 2 days via
5.00% off
€14.96 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Drill Bushing |
| Bushing Code | PM |
| Bushing Head Type | Headless |
| Bushing Type | Headless Press Fit Thin Wall |
| Concentricity Tolerance | 0.0003" |
| Decimal Equivalent | 0.1575 |
| Drill Bushing Wall Type | Thin Wall |
| Drill Size | 4 mm |
| Finish | Steel |
| Head Material | High Speed Steel |
| Head Type | No |
| Heat Treatment | Through Hardened |
| Inside Dia. | 4 mm |
| Inside Dia. Tolerance | +0.0001" to +0.0005" |
| Material | Steel |
| Material-machining | High Speed Steel |
| Measurement System | Metric |
| Outside Dia. | 5/16" |
| Outside Dia. Tolerance | 0.0013" to 0.0016" |
| Overall Length | 5/8" |
| Rockwell Hardness | RC 62-64 |
Shipping Info:
| Ship height (cm) | 1.59 |
| Ship length (cm) | 0.8 |
| Ship width (cm) | 0.8 |
| HS code | 8207907585 |
| Country of Origin | GB |
Product Variants
| Model | Inside Dia. | Bushing Code | Bushing Head Type | Drill Bushing Wall Type | Decimal Equivalent | Inside Dia. Tolerance | Outside Dia. Tolerance | Drill Size | Price | |
|---|---|---|---|---|---|---|---|---|---|---|
| H136BA | #58 | H | Headed | Standard Wall | 0.042 | +0.0001" to +0.0004" | 0.0012" to 0.0015" | #58 | €64.58 | |
| H138AA | #80 | H | Headed | Standard Wall | 0.0135 | +0.0003" to +0.0007" | 0.0012" to 0.0015" | #80 | €74.08 | |
| H138AM | #69 | H | Headed | Standard Wall | 0.0292 | +0.0002" to +0.0006" | 0.0012" to 0.0015" | #69 | €67.94 | |
| H138AR | #65 | H | Headed | Standard Wall | 0.035 | +0.0001" to +0.0005" | 0.0012" to 0.0015" | #65 | €67.94 | |
| H138BJ | #55 | H | Headed | Standard Wall | 0.052 | +0.0001" to +0.0004" | 0.0012" to 0.0015" | #55 | €70.78 | |
| H138CX | - | HM | Headed | Standard Wall | 0.0965 | +0.0001" to +0.0005" | 0.0012" to 0.0015" | - | €24.09 | |
| H14416RF | 1 13/32" | H | Headed | Standard Wall | 1.4062 | +0.0001" to +0.0005" | 0.0021" to 0.0025" | 1 13/32" | €52.30 |
Explore Products
- SMC VALVES SY3220-6LOZ-N7 Solenoid Valve, Rubber Seal, Base Mount
- GEMS SENSORS PS75-40-4FNZ-C-H Pressure Switch, 1/4 NPT Female, 150 to 650 PSI, SPDT, Zinc-Plated Steel Housing
- EXAIR 1230ss-18-cs Safety Air Gun, 22 CFM, 18 Inch Ext, Shield, Max. dBA: 77
- ADVANCE TABCO SW-2E-240-DR Hot Food Table, Electric, 31-13/16 X 30-5/8 X 34-1/8 Inch Size
- NOTRAX 130C0048GN324 Indoor Entrance Mat, 4 ft. X 27 ft., Hunter Green
- PROTEAM 107199 Squeegee Tool, 14 Inch
- INTERNAL TOOL 41-6090 Micro Endmill, 0.09 Inch Dia, 0.27 Inch Cut Length, 4 Flute, Ball End
- WEG 01518XT3E254T 14406836 Explosion Proof Motor, 15 HP, 1800 RPM, 208/230/460 V, 3 Phase, XPFC, 254T Frame, Footed
Popular Search Queries
- Approved-vendor Ms16555-641
- Approved-vendor Ms16555-640
- Approved-vendor Ms16555-622
- Approved-vendor Ms16555-625
- Approved-vendor Ms15795-803
- Approved-vendor Nas1352n08-10
- Approved-vendor Ms16555-602
- Approved-vendor Ms15795-806
- Approved-vendor Ms15795-805
- Approved-vendor Ms16555-617
- Approved-vendor Ms16555-629
Explore More
- CASH VALVE
- KEYSHAFT
- LEESON
- SHARPEDGE TESTER
- DELTANA
- Pipe Hangers and Clamps
- Water Heater Elements
- Cold Air Guns
- Flexible Ducts
- Dilution Tanks and Traps
- SHARPE VALVES Carbon Steel Inline Ball Valve, FNPT x FNPT
- CONDOR Electrical Gloves Protector, White/Orange/Green, 15 Inch Length
- CONDOR Goatskin Leather Pearl Welding Gloves
- DESTACO 375-R Series Pull Action Latch Clamps
- VIBCO Big Buster Pneumatic Vibrators
- CONRADER GV Series Inline Cast Bronze Check Valves
- EATON CHNT Series Circuit Breakers
- APPROVED VENDOR #10-32 Fully Threaded Low Wide Slotted Truss Passivated Stainless Steel Rounded Machine Screws
- AMERICAN TORCH TIP Victor Cutting Tips, 3-GPN Style
- NIBCO 501 Series Flared Couplings, FL x FL, Cast
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
APPROVED VENDOR PT2010EW Drill Bushing Type Headless Press Fit Drill Size 4mm
€15.75 /unit