APPROVED VENDOR M12910.080.0001 Hex Locknut, M8x1.25 Thread Size, Top Lock Distorted Thread, 13mm Hex Wd., Class 10
Get it by Tuesday, Feb 24
€ 24,99 Flat Shipping + VAT € 24,99 flat shipping is applicable on orders with an aggregate weight less than 10kg. Orders exceeding 10kg will be charged default shipping rates.
5.00% off
€16.34 /pkg. of 100
Add To Cart
Request a Quote
Payment
Delivery
Product Specifications:
| Item | Hex Locknut |
| Class | Class 10 |
| Dimensional Standards | D980V |
| Finish | Zinc Plated |
| Hardness | Rockwell 36 |
| Hex Height | 8 mm |
| Hex Type | Standard Hex Top Lock |
| Hex Width | 13 mm |
| Lock Type | Top Lock Distorted Thread |
| Material | Steel |
| Material Grade/class | Class 10 |
| Nut Height | 8 mm |
| Nut Type | Top Lock Distorted Thread |
| System Of Measurement | Metric |
| Temp. Range | -58°F to +302°F |
| Thread Direction | Right Hand |
| Thread Size | M8 x 1.25 |
| Thread Type | Metric |
| Type | Standard Hex Top Lock |
Shipping Info:
| Ship weight (kg) | 0.56 |
| Ship height (cm) | 1.27 |
| Ship length (cm) | 16.99 |
| Ship width (cm) | 16.38 |
| HS code | 7318160085 |
| Country of Origin | TW |
Product Variants
| Product | Model | Thread Size | Hex Width | Hex Height | Nut Height | Hardness | Temp. Range | Hex Type | Pkg. Qty. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
M12910.040.0001 | M4 x 0.7 | 7 mm | 5 mm | 5 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 100 | €61.98 | |
 |
M12910.060.0001 | M6 x 1 | 10 mm | 6 mm | 6 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 100 | €17.23 | |
|
M12910.100.0001 | M10 x 1.5 | 17 mm | 10 mm | 10 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 100 | €48.68 | |
 |
M12910.120.0001 | M12 x 1.75 | 19 mm | 12 mm | 12 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 50 | €23.56 | |
|
M12910.140.0001 | M14 x 2 | 22 mm | 14 mm | 14 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 50 | €76.60 | |
|
M12910.160.0001 | M16 x 2 | 24 mm | 16 mm | 16 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 25 | €24.28 | |
|
M12910.180.0001 | M18 x 2.5 | 27 mm | 18 mm | 18 mm | Rockwell 36 | -58°F to +302°F | Standard Hex Top Lock | 25 | €107.57 |
Explore Products
- WEG GPH2150PC2000 15472281 Soft Starter, 150 HP, 230V, AC3 Bypass, Start/Stop Pushbutton, Run & Fault Light
- CEMENTEX USA IG0-14-8Y Gloves, 14 Inch Length, Class 0, 8 Size, Yellow
- MERIT 08834137574 Flap Wheel, 3/4 Inch Dia x 1/2 Inch Width, 1/8 Inch Straight-Shank, Aluminum Oxide, 240 Grit
- TEADIT CGF1000M.116.5.300 Full Face Cut Gasket, NA1000M, 1/16 Inch Thickness, 5 Inch Size, 300# Class
- T&S B-0133-A06-B08 Pre-Rinse Faucet, Spring Action, 8 Inch Wall Mount Base, 6 Inch Add-On
- GRAINGER 1358_24_0 Brass Rectangular Bar, 360, 3/8 Inch X 24 Inch Nominal Size, 0.125 Inch Thick
- GEARENCH HP374
- PASS AND SEYMOUR IG4710 Single Receptacle, 15A, Isolated Ground, Orange
Popular Search Queries
- Approved-vendor Ms16555-629
- Approved-vendor Ms16555-641
- Approved-vendor Ms16555-602
- Approved-vendor Ms15795-806
- Approved-vendor Ms15795-805
- Approved-vendor Ms16555-640
- Approved-vendor Nas1352n08-10
- Approved-vendor Ms15795-803
- Approved-vendor Ms16555-617
- Approved-vendor Ms16555-622
- Approved-vendor Ms16555-625
Explore More
- KEYSHAFT
- RENFROE
- OLDE TYME
- TITUS
- Extra Long Drill Bits
- Dryer Booster Fans
- Vacuum Ejectors
- Indexable Toolholders
- Straight Flute Drill Bits
- OIL SAFE Spill Decks
- YELLOW JACKET Tube Cutters
- HELICOIL High Spiral Flute Bottoming Taps, UNC, 2B
- BURNDY HYSTACK Terminal Stacking Adapters
- CENTURY 1/2" Shaft Condenser Fan Motors
- ADVANCE TABCO Undermount Sink
- REGAL Performance Taper Pipe Taps, NPT, Nitride & Steam Oxide
- NOVATEK Air Filters
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
APPROVED VENDOR M12910.080.0001 Hex Locknut, M8x1.25 Thread Size, Top Lock Distorted Thread, 13mm Hex Wd., Class 10
€17.20 /pack