ANVIL FIG 167 Insulation Protection Shield, 2-1/2 Inch Insulation

Anvil FIG 167 insulation protection shield is ideal for the outer end of fibreglass or foam insulation to evenly disperse pipe loads and prevent the crushing of the insulation without breaking the vapour barrier.

Features:

• Anvil FIG 167 insulation protection shield has carbon steel construction to enhance durability.
• It features galvanised finish for corrosion resistance and has 18 gauge thickness for high compressive strength.
• This Anvil insulation shield accommodates pipe sizes ranging from 1/2 to 24 inches.

Compatible Accessories:

• Anvil Strut Pipe Clamps: They hold the insulation shield in place during installation.

Standards and Approvals:

• ANSI

Frequently Asked Questions:

Q. How do you measure insulation thickness?

A. The thickness can be measured by multiplying the ratio of the insulation material conductivity to the surface coefficient.

Q. What factors do I need to consider while choosing a pipe support?

A.

• Process design conditions.
• Construction material of the pipe.
• Design load of the piping.
• Cladding and insulation on piping.
• Thermal forces & displacement of piping.
• Ease of inspection, operation and installation.

Q. Is Anvil FIG 167 insulation protection shield suitable for both horizontal and vertical pipe installations?

A. Yes, it is designed to protect insulation effectively in both horizontal and vertical pipe installations.