FREE delivery on orders over €150
ABBOTT WORKHOLDING PRODUCTS TG8MDA2 Lathe Jaw, Pointed, Tongue and Groove, Aluminium, For 8 in Chuck, 4 in Ht
Item: CN7XWPModel: TG8MDA2Cross Ref: 48TX76
7 In Stock
Ships within 2 days via
10.00% off
€237.37 /unit
Add To Cart
Request a Quote
Payment
Product Specifications:
| Item | Jaw |
| Chuck Interface Type | Tongue And Groove |
| Distance Between Mount Hole Centers | 1 3/4" |
| Distance Between Mounting Holes | 1 3/4" |
| For Chuck Diameter | 8" |
| For Use With | 8 In Chucks |
| Grade | Grade 6061-T6 |
| Groove Width | 0.313" |
| Hard Or Soft | Soft |
| Jaw Face Type | Pointed |
| Jaw Hardness | Soft |
| Jaw Interface Type | Tongue And Groove |
| Material | Aluminum |
| Material Grade | 6061-T6 |
| Mounting Bolt Size | 3/8" |
| Number Of Jaws | 3 |
| Overall Height | 4" |
| Overall Length | 4" |
| Overall Width | 1 1/2" |
| Tongue Width | 1/2" |
Shipping Info:
| Ship weight (kg) | 2.57 |
| Ship height (cm) | 2.54 |
| Ship length (cm) | 2.54 |
| Ship width (cm) | 2.54 |
| Country of Origin | US |
Product Variants
| Product | Model | Overall Height | Overall Width | Overall Length | Jaw Face Type | Groove Width | Jaw Interface Type | Distance Between Mount Hole Centers | Grade | Pkg. Qty. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
TG10MDP | 2" | 10" | 10" | Pointed | 1/2" | Tongue And Groove | 2 1/8" | - | 1 | €451.00 | |
|
TG12HDP | 2" | 12" | 12" | Pointed | 1/2" | Tongue And Groove | 2 1/2" | - | 1 | €553.88 | |
 |
KTT10P3 | 3" | 10" | 10" | Round | 0.63" | Serrated | 1.181" | Grade 6061-T6 | 1 | €553.48 | |
|
TG8MDP6 | 6" | 8" | 8" | Pointed | 0.313" | Tongue And Groove | 1 3/4" | Grade 6061-T6 | 3 | €873.75 | |
|
TG10HDP1 | 4" | 10" | 10" | Pointed | 1/2" | Tongue And Groove | 2 1/8" | - | 1 | €599.51 | |
 |
SMW8P | 2" | 8" | 8" | Pointed | 0.669" | Serrated | 0.906" | - | 1 | €306.83 | |
|
SMW12P | 2" | 12" | 12" | Pointed | 0.872" | Serrated | 1.181" | - | 1 | €560.55 |
Explore Products
- BALDOR MOTOR L3401 Single Phase Motor, 115/230V, 1200 RPM, 60 Hz, 0.16 hp, TEFC, 48 Frame
- GROVE GEAR NH8180133.00 NH-BMQ818-5-D-56 Worm Reducer, 5:1 Ratio, 0.625 Inch I.D, 1 Inch O.D, Cast Iron
- WINSMITH E26MSFS41270A8 Gear Reducer, 56C Input Flange, Hollow Bore
- PBC LINEAR CFPJ60
- BALDOR MOTOR VM3541-5 Three Phase Enclosed Motor, 575V, 3600 RPM, 60 Hz, 0.75 hp, TEFC, 56C Frame
- GRAINGER PMW-NYL-200M-12X72 Nylon Wire Mesh, 12 Inch Overall Length, 6 ft Overall Width, 0.0015 Inch Wire Dia
- VALLEY CRAFT F82025A4P Drum Truck with Hand Brake, 1000 lbs Capacity, 12.5 Inch Pneumatic Drive Wheel, Plastic Drum
Explore More
- KEYSHAFT
- TRIMCO GROUP
- STELLAR
- ARGOS TECHNOLOGIES
- L9
- Gas Tankless Water Heaters
- Motor Pack Conversion Kits
- Laboratory Microscopes
- Wheel Torque Sockets
- Pin Receptacles
- DWYER INSTRUMENTS 629C Series Wet/Wet Differential Pressure Transmitters
- ANSELL 80-100 Activarmr Natural Rubber Latex Coated Gloves
- CONDOR High-Visibility Vest, Mesh Polyester, X Stripe Pattern, Single, Orange
- RUD CHAIN VABH-W VIP Excavator Hooks
- PASS AND SEYMOUR Surge Protective Isolated Ground Receptacles
- TB WOODS G-Flex Vertical Cover Kits
- MECHANIX Knit General Purpose Gloves
- TEMPCO Digital Temperature Control Consoles
- STARRETT 780XT Electronic Internal Micrometers
Contact us
Contact your account manager right away to get personal advice.
We're available Monday through Friday, from 07:30 until 17:00.
ABBOTT WORKHOLDING PRODUCTS TG8MDA2 Lathe Jaw, Pointed, Tongue and Groove, Aluminium, For 8 in Chuck, 4 in Ht
€263.75 /unit