Onboard Raptor as a vendor
Email

HARTELL AL2 Series Condensate Pumps


Hartell AL2 Series condensate pumps are designed for applications that involve high surges of water. These electrically powered centrifugal pumps allow easy discharge of excess condensate fluid which cannot be done via a gravity feed.

Filter
HARTELL AL2-X115A
StyleModelTank MaterialTypeFlow Rate @ 20 Ft.HpTank CapacityMax. Flow Rate @ 15 Ft.Pump TypeIntake Connection StylePrice
A
AL2-X115		AluminumWith Auxiliary Switch0.9 GPM1/10 hp2 gal.1.7 GPMStandardOpen€1,320.30
A
AL2-X230		AluminumWith Auxiliary Switch0.9 GPM1/10 hp2 gal.1.7 GPMStandardOpen€1,364.42
A
AL2-115		Die Cast AluminumWithout Auxiliary Switch0.9 GPM1/10 hp2 gal.1.7 GPM--€685.87
A
AL2-230		Die Cast AluminumWithout Auxiliary Switch51 GPH1/10 hp2 gal.1.7 GPM--€702.93

Features

  • These pumps feature a 2-gallon cast aluminium reservoir which accumulates the condensed liquid from commercial ice machines and during cleaning of flush cycles.
  • The pump's motor is thermally protected to prevent internal damage due to excessive heat and stainless steel shafts to protect against corrosion.
  • They feature a snap action switch (attached to the float) that gets activated when the water level rises / lowers in the tank. This eventually signals the pump to start / stop the motor and maintain the condensate level in the tank.
  • All elements offer excellent oil and chemical resistance and can handle a maximum temperature of 150 degrees F.

Frequently Asked Questions

What is a condensate in HVAC?

Condensate is produced when humid air is passed over the cooling coils at a temperature of around 55 degrees F, causing the moisture in the air to condense on the coil and drain into the condensate pan. From there the condensate is pumped out of the system where it doesn't cause damage to the internal parts.

What is a pumping head?

Pumping head refers to the maximum height that the pump can achieve while pumping against gravity. AL2 Series condensate pumps feature a maximum height of 22 feet with flow rates of up to 185 gal/hr.

What is the advantage of motor bearings?

AL2 Series pumps provide three levels of motor bearing protection from steam and water splash to offer extended motor life.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More