EATON CH Series Circuit Breaker Surge Protective Devices
Eaton CH Series circuit breaker surge protective devices are installed in electrical panels to disconnect the circuit during a surge, preventing damage to appliances and other equipment. These units are designed to protect against both internal and external voltage surges.
| Style | Model | Height | Price | |
|---|---|---|---|---|
| A | CHQSA | - | €121.61 | RFQ
|
| B | CHSPT1MICRO | 1" | €522.70 | |
| C | CHSPT1ULTRA | 1" | €1,022.14 | |
| D | CHSPT1-208Y | 1" | - | RFQ
|
| E | CHSPT1MAX | 3" | €772.42 | |
| F | CHSPT22PACK | 6 1/2" | €551.17 |
Working Mechanism
- Eaton CB-SPDs monitor the voltage on the circuit and disconnect the power when a surge is detected.
- When the surge occurs, the voltage sensor detects the increase in voltage and sends a signal to the relay.
- The relay then disconnects the power to the circuit, breaking the connection between the power source and the equipment.
- This prevents the surge from reaching the equipment and causing damage.
Frequently Asked Questions
What are internal and external surges?
Internal surges occur within a building's electrical system and are caused by equipment turning on & off or by electrical arcing. External surges are due to events outside the building, such as lightning strikes or power outages.
Can a CB-SPD be used with other surge protection devices?
Yes, you can use a CB-SPD with other surge protection devices, such as point-of-use surge protectors and whole-house surge protectors. This addition provides multiple layers of protection for your equipment and increases the overall protection level of your electrical system.
Will a circuit breaker surge protective device affect the performance of my equipment?
A properly functioning CB-SPD will not affect the performance of your equipment. The device only disconnects power to the circuit when a surge is detected and does not interfere with the normal operation of the equipment.
We are here to help!
Looking for a part not listed here?
Explore More
- KEYSHAFT
- REELCRAFT
- MALIN CO.
- CALBOND
- REGAL BELOIT
- Threaded Rods
- Spill Containment Platform and Pallet Ramps
- Annular Cutters
- Immersion Heaters
- Hydraulic Cylinder
- PROPPER Men's Uniform Tactical Pants
- JOHN GUEST Male Connectors, NPTF Thread, Acetal Gray
- TEMPCO Replacement Heating Elements for TRH3 Series Heaters
- KEO Combined Drills And Countersinks, Bell Type, 60 Degrees Countersink Angle
- DAYTON High Pressure Blowers
- APPROVED VENDOR Replacement Screen
- COLDER PRODUCTS COMPANY MC Series Coupling Bodies
- MAIN FILTER INC. Interchange Hydraulic Filters, Cellulose, 25 Micron, Buna Seal
- GENERAL PIPE CLEANERS Connecting Screws





