Onboard Raptor as a vendor
Email

EATON AR/ARD Series Industrial Control Relays


Eaton AR / ARD Series industrial control relays are used to control the operation of motors, lighting systems, valves, pumps, conveyors, and other equipment in industrial settings. AR relays are available in four- or six-pole configurations and are field convertible to eight-or ten-poles by sim...ply adding a four-pole deck. They use a permanent magnet to hold the relay contacts in a latched / locked position until reset by an external signal. The contacts in these relays are wide-spaced to simplify installation and allow easy testing and maintenance.Read more

Filter
EATON AR420FA
EATON ARD880URB
EATON AR6AC
EATON ARD420UD
StyleModelProduct HeightCoil VoltageProduct WidthFrequencyNo. Of CavitiesMfr. SeriesContact ConfigurationVoltagePrice
A
AR420F		--------€718.41
B
ARD880UR		--------€1,852.65
B
ARD422M		--------€1,312.29
B
ARD4T		--------€1,049.39
B
ARD440M		--------€1,491.25
B
ARD440SR		--------€1,154.02
C
AR6A		--------€549.39
B
ARD422S		--------€1,496.91
B
ARD440S		--------€1,154.02
B
ARD6T		--------€1,053.35
B
ARD660UR		--------€1,721.37
C
AR6I		--------€492.04
B
ARD4UR		---------
RFQ
B
ARD6L		---------
RFQ
C
AR880W		--------€1,411.45
C
ARA		--------€187.03
D
ARD420U		--------€1,268.02
B
ARD420T		--------€1,272.83
B
ARD420M		--------€1,272.83
B
ARD10100LR		--------€2,164.54
D
ARD0CR		--------€227.54
B
ARD440L		-24V DC3 11/25"-0Ar/Ard4 NO-€1,496.91
A
AR440X		--------€963.30
A
AR4A		--------€555.60
B
ARD660L		--------€1,727.92
B
ARD4U		--------€1,049.39
B
ARD880T		--------€1,940.03
B
ARD440LR		-24V DC3 11/25"-0Ar/Ard4 NO300V€1,504.64
B
ARD440T		--------€773.85
B
ARD4S		--------€1,049.39
B
ARD4M		--------€1,009.94
B
ARD440U		---------
RFQ
A
AR440A		--------€600.72
B
ARD660T		--------€1,656.67
B
ARDA40S		---------
RFQ
B
ARD660D		--------€1,727.92
B
ARD6S		--------€1,053.35
A
AR420A		---------
RFQ
D
AR660H		1"380/440V1"--Ar6 NO-0 NC600V€681.21
A
AR420B		3 14/25"208V3 11/25"-2Ar/Ard2 NO600V€718.41
A
AR440I		3 14/25"24V3 11/25"--Ar/Ard4 NO600V€963.30
A
AR420W		3 14/25"220/240V3 11/25"-2Ar/Ard2 NO600V€718.41
A
AR4AR		3 14/25"-3 11/25"-----€490.16
A
AR422AS2		3 14/25"110/220V3 11/25"-0Ar/Ard2 NO, 2 NC-€1,359.63
A
AR422AR		3 14/25"110/220V3 11/25"-0Ar/Ard2 NO, 2 NC-€844.51
A
AR440AR		3 14/25"110/120V--0Ar/Ard4 NO-€742.16
A
AR422XR		3 14/25"440/480V3 11/25"-0Ar/Ard2 NO, 2 NC600V€1,111.71
A
AR431A		3 14/25"-3 11/25"-----€963.30
A
AR420WR		3 14/25"240V DC3 11/25"-2Ar/Ard2 NO-€683.80
A
AR420XR		3 14/25"440/480V3 11/25"-2Ar/Ard2 NO600V€718.15
A
AR422A		3 14/25"120V3 11/25"-0Ar/Ard--€844.51
A
AR440BR		3 14/25"208V3 11/25"-0Ar/Ard4 NO600V€968.26
A
AR440GR		3 14/25"48V3 11/25"-0Ar/Ard4 NO-€963.30
A
AR422AS		3 14/25"120V3 11/25"-0Ar/Ard2 NO, 2 NC-€1,065.80
A
AR10100A		3 14/25"110/120V3 11/25"50-60 Hz0Ar/Ard10 NO-€1,771.79
A
AR440E		3 14/25"550/600V3 11/25"-0Ar/Ard4 NO-€959.67
A
AR4W		3 14/25"220/240V3 11/25"-4Ar/Ard-600V€490.16
A
AR422BS2		3 14/25"208V3 11/25"-0-2 NO, 2 NC600V€1,178.10
A
AR420IR		3 14/25"24V3 11/25"-2Ar/Ard2 NO-€670.39
A
AR420E		3 14/25"550/600V3 11/25"-2Ar/Ard2 NO-€688.80
A
AR420X		3 14/25"440/480V3 11/25"-2Ar/Ard2 NO600V-
RFQ

Working Mechanism

  • By energising the relay coil, the latch attachment sets, holding the relay in an ON state, even after the relay coil has been de-energised.
  • As the coil on the latch is energised again, the armature / crossbar assembly releases and change the state of the relay.

Frequently Asked Questions

What is the function of a surge suppressor?

  • A surge suppressor is used in industrial control relays to protect them from voltage surges and transients.
  • These surges can be caused by lightning strikes, power outages or other electrical disturbances.
  • The suppressor diverts the excess voltage away from the relay and into a ground connection, protecting the relay from damage.

What are convertible relays?

Convertible relays have a set of normally open and normally closed contacts that can be switched with each other, making them more versatile to be used in a variety of applications. The field conversation can be done by a user either manually or by software, depending on the relay design.

What are overlap contacts?

  • Overlap contacts are used in industrial relays and are designed to overlap each other while creating a larger contact area to reduce the risk of arching & contact erosion.
  • The increased contact area also reduces the electrical resistance and heat generated by the contact.
  • These contacts can handle high current and voltage, making them ideal for motor controls, power generation and other high-power industrial applications.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More