EATON 5100 Series Dust Caps and Dust Plugs
Eaton 5100 Series dust caps & dust plugs are used in hydraulic and pneumatic applications to protect the open ends of hydraulic & pneumatic lines from contamination caused by dirt, dust and debris.
Filter
A
B| Style | Model | Thread Size 1 | Height | End Size 1 | For Hose Dash Size | Item Type | Compatible Tube Outside Dia. | Material | Thread Sealant | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 5100-S7-12 | 1 1/2"-12 | 1 1/5" | 5/8" | -12 | Caps | 3/4" | Brass | No | €48.74 | |
| B | 5100-S9-12 | 1 1/2"-12 | 1.78" | 3/4" | -12 | Plugs | 3/4" | Brass | No | €54.85 | |
| A | 5100-S7-16 | 1 7/8"-12 | 1 7/25" | 2.1" | -16 | Caps | 1/4" | Brass | No | €59.96 | |
| B | 5100-S9-16 | 1 7/8"-12 | 1.58" | 1" | -16 | Plugs | - | Brass | No | €63.42 | |
| A | 5100-S7-20 | 2 1/8"-12 | 1.43" | 2.35" | -20 | Caps | 1 1/8" | Brass | No | €96.91 | |
| B | 5100-S9-20 | 2 1/8"-12 | 1 18/25" | 1 1/4" | -20 | Plugs | 1 1/8" | Brass | No | €90.15 |
Features
- They feature tubular valve construction to prevent fluid loss during disconnection and reduce hazards.
- These dust caps & plugs have a steel flange to mount on a bulkhead for easy accessibility.
- They come with low air inclusion during connection for enhanced performance.
- These dust caps & plugs have a brass or carbon steel body with zinc trivalent plated valving components.
- They offer Buna-N seals for leak proof application and prevent contamination.
Frequently Asked Questions
Which fuel is compatible with these dust caps & dust plugs?
Hydraulic oil.
How to maintain Eaton 5100 Series dust caps & dust plugs?
- Regularly inspect the dust caps and dust plugs for signs of wear, damage or deformation.
- Replace any damaged or worn out caps or plugs immediately.
- Clean them before and after each use to remove any dirt or debris that may have accumulated on them.
- Lubricate these dust caps and dust plugs with a light oil or silicone lubricant to prevent them from sticking or becoming difficult to remove.
- Store these units in a clean & dry place when not in use.
- Do not store them in damp or humid environments, as this can cause rust or corrosion.
- Use proper handling techniques when installing and removing dust caps and dust plugs.
- Do not use excessive force and make sure to align them properly with the mating coupling to prevent damage to the cap or plug.
How do I install and remove Eaton 5100 series dust caps and dust plugs?
- Align them with the mating coupling.
- Push or twist them into place.
- Pull or twist them off to remove.
We are here to help!
Looking for a part not listed here?
Explore More
- GREENLEE
- KEYSHAFT
- PACIFIC LASER SYSTEMS
- TAPE LOGIC
- CORTINA SAFETY PRODUCTS
- Wire Twist Pliers
- Meal Delivery Carts
- Fuel Transfer Pumps w/Nozzle
- Exterior Paints
- Insulator Washers
- AKRO-MILS 13018 Stak-N-Store Bins
- JACKSON SAFETY Due North All-Purpose Industrieal Ice Traction Aids-Replaceable Spikes
- RUD CHAIN VIP Oval Links For Power Point
- ANVIL AS1450 Series One Hole Clamps, Electro Galvanized
- ANVIL AS150BTB Series Welded Channels
- DAYCO Tension Pulley
- SPEARS VALVES PVC Wafer Butterfly Valve Overhaul Kits With Disc, FKM
- APPROVED VENDOR 7/16-14 Coarse
- HARRIS 447 Series Station Regulators, 7/8 to 14 Inch C Inlet
- ADAPT-ALL 9007 Series Fitting Adapters, Male BSPP X Male NPT Nipple