DAYTON Sprinkler Pumps, 2 HP, 1 Phase
Dayton sprinkler pumps have 2 hp, 1-phase motors. They are used for self-priming applications such as sprinkling, spraying, irrigation and dewatering of lawns & agricultural lands. These pressure pumps remove the air pockets inside their passages by using an air-water mixture to reach a fully-p...rimed pumping condition in continuous duty applications. They are ideal for non-flammable & non-abrasive liquids compatible with pump component materials.Read more
A| Style | Model | Nameplate Voltage | Max. Head | No. Of Stages | Height | Best Efficiency Head | Best Efficiency Flow Range @ Head | Best Efficiency Flow Rate @ Head | Flow Rate @ 2 Ft. | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 5RWG9 | 115/208-230V AC | 118 ft. | 1 | 10 2/3" | 80 ft. | 66-10GPM @ 57-104 Ft | 42 GPM @ 80 ft. | 96 GPM | €1,784.65 | |
| A | 5RWH0 | 120/208-240V AC | 147 ft. | 2 | 9 1/4" | 105 ft. | 48-30 GPM @ 80-130 Ft | 40 GPM @ 105 ft. | 65 GPM | €1,838.52 |
Sprinkler Pumps, 2 HP, 1 Phase
Dayton sprinkler pumps are self-priming pressure pumps that provide better efficiency by removing the air pockets and are ideal for use with non-flammable liquids compatible with pump component materials. The pump housing is made from durable cast iron and includes a TEFC, capacitor star motor capable of a maximum output of 2 HP. These manually operated pumps feature built-in thermal overload protection with automatic reset and double-shielded, pre-lubricated ball bearings for smooth operation. The stainless steel impellers are ideal for withstanding wet operations, while Buna-N, carbon & ceramic seals prevent leakage. Choose from a wide range of sprinkler pumps, available in 75 and 96 PSI pressure ratings on Raptor Supplies.
Features
- Dayton sprinkler pumps use a 2 hp, capacitor-run & capacitor-start motor with a TEFC enclosure to prevent entry of debris inside the unit.
- They are equipped with Buna-N, carbon & ceramic seals for preventing leakage.
- These manually operated pumps have built-in thermal overload protection with automatic reset for protecting the unit and double-shielded, pre-lubricated ball bearings for smooth operation.
- They deliver pressure up to 75 psi.
- These non-submersible pumps have 56J / 56JZ frames and feature front drain plug and removable & replaceable volute / diffusers for long-term operation.
Compatible Accessories
- Dayton PPTLS0705G Adapters
- Dayton PPTLS0704G Flapper Valves for Dayton 5RWH0 sprinkler pump
- Dayton PPTLS0702G Housing for Dayton 5RWH0 sprinkler pump
- Dayton PPTLS2201G Motors for Dayton 5RWH0 sprinkler pump
- Dayton PPTLS2222G Shaft Sleeves for Dayton 5RWH0 sprinkler pump.
- Dayton PPTLS2006G Impellers for Dayton 5RWG9 sprinkler pump
Standards and Approvals
- CSA
Frequently Asked Questions
What materials are used for constructing these Dayton sprinkler pumps?
The housing of these pumps is made from cast iron for durability & structural strength and the impellers are made of stainless steel for corrosion resistance in wet environments.
What are the power requirements of these sprinkler pumps?
These Dayton sprinkler pumps operate at voltages ranging from 120 to 240VAC.
What are the sizes of inlet & outlet connections of these pumps?
These 2 hp sprinkler pumps have outlet & inlet connections of 1-1/2 inch NPT.
What is the suction lift of these sprinkler pumps?
These pumps have a suction lift of 25 feet.
We are here to help!
Looking for a part not listed here?
Popular Search Queries
Explore More
- FLEXIDUCT
- KEYSHAFT
- SCOTCHMATE
- MEM CO
- CAPTRON
- Electric Baseboard Heater Accessories
- Glove Holder Clips
- Grease Feeders
- Band Saw Accessories
- Air and Vacuum Release Valves
- 3M 6000 Series Mold Remediation Respirator Kits
- MECHANIX Hook And Loop General Utility Mechanics Gloves
- DESTACO 341-R Series Pull Action Latch Clamps
- GARDNER BENDER Electrical Conduit Bender, 1/2 To 2, 20a
- SPEARS VALVES PVC 100 PSI Fabricated 90 Deg. Elbows, Gasket x Spigot
- SMC VALVES Acnl Series Tie-Rod Cylinder
- STRONG HOLD Mobile Shelf Cabinets
- NIBCO T-560-CS-R-66-LL Series One-Piece Carbon Steel Ball Valves, Reduced Port, Stainless Steel Trim