Onboard Raptor as a vendor
Email

DAYTON DC Speed Control


Dayton DC speed controls are designed to regulate DC motor speed in conveyors, centrifuges and packaging equipment. These controls feature transient and surge suppression ability to protect a motor against sudden electric surges.

Filter
DAYTON 1F794A
DAYTON 2M171B
DAYTON 4Z827C
DAYTON 4Z829D
DAYTON 5X485E
DAYTON 6X165F
DAYTON 2PUX3G
DAYTON 5X412H
StyleModelInput VoltageOutput VoltageEnclosure TypeMax. AmpsSpeed RangeRotationEnclosure RatingOverall WidthPrice
A
1F794		120/240V AC0-90/180V DCEnclosed10A50:1ReversibleNEMA 4X5"€1,412.93
B
2M171		120/240V AC0-90/180V DCEnclosed10A50:1ReversibleNEMA 45"€948.97
C
4Z827		120/240V AC0-90/180V DCOpen2A25:1Single Direction-4.9"€229.51
D
4Z829		120/240V AC0-90/180V DCEnclosed10A50:1ReversibleNEMA 4X5"€1,361.92
E
5X485		120/240V AC0-90/180V DCEnclosed10A50:1Single DirectionNEMA 4X5"€841.71
F
6X165		120/240V AC0-90/180V DCEnclosed1.2A50:1ReversibleNEMA 4X5"€1,243.09
G
2PUX3		120V AC0-90V DCEnclosed3A15:1Single DirectionIP302.61"€966.40
H
5X412		120V AC0-90V DCEnclosed2A25:1Single DirectionNEMA 16"€447.55

DC Speed Control

Dayton DC speed controls are designed to control and monitor the performance of a DC motor. These speed controls feature transient and surge suppression ability to protect a motor against sudden electrical disturbances. They are equipped with a trimpot for easy acceleration and deceleration adjustments, are packed in a rugged NEMA / Chassis / IP 30 enclosure and come with run / stop and forward / reverse switches for easy operation. Choose from a wide range of Dayton DC speed controls, available for a maximum ampere rating of 10 A on Raptor Supplies.

Features

  • These units feature a silicon-controlled rectifier (SCR) to convert AC voltage to DC voltage, thereby providing variable speed control for DC motors.
  • They are integrated with a trimpot for easy acceleration & declaration adjustments and a patented Power Start feature that offers more than 200% starting torque, thus ensuring startup of high frictional loads.
  • These controls provide motor overload protection to prevent motor burnout & nuisance trips.
  • They come equipped with a tachometer to record unloaded speed and are packed in a rugged NEMA / IP30 rated enclosure for protection against dangerous electrical parts.
  • These units are facilitated with run / stop & forward / reverse switches for ease in operation and come with a Dayton DC speed control manual for user convenience.

Frequently Asked Questions

What is the operating temperature range for Dayton DC speed controls?

Dayton DC speed controls have an ambient operating temperature range of -10 to 45 degrees C.

Does the trimpot unit require any calibration post-installation?

The adjustable trimpot units are mostly factory calibrated. They can be readjusted for special cases by manually adjusting minimum / maximum / acceleration / deceleration speeds or slip compensation (Volts/Hz) of the DC control.

Why are speed controls needed in a DC motor?

In most mechanical applications, a speed control controls the device's speed fluctuation to maintain a constant (or diminishing) torque. It is designed to perform in only one permanent magnet or shunt wound DC motor.

We are here to help!

Looking for a part not listed here?

Chat with us now

Popular Search Queries

Explore More