DAYTON Backward Inclined Blowers, 18-1/4 Inch Wheel Diameter


Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , CFM @ 0.250-In. SP: 3780 , Depth: 32" , Discharge Height (In.): 19.625 , Discharge Width (In.): 14.25 , Footnotes: # Motor Overload Condition , Height: 37" , Housing Finish: Gray Baked Polyester Epoxy , Housing Material: Steel , Hz: 60 , Inlet Dia.: 19-5/8" , Max. Ambient Temp.: 104 F , Max. Inlet Temp.: 250 Deg.F , Motor Enclosure: Open Dripproof , Rotation: CW , Shaft Dia.: 1-3/16" , Wheel Diameter: 18 1/4" , Wheel Material: Steel , Wheel Width: 9 7/32" , Width: 40"
StyleModelMotor TypedBA @ 5 FeetBlower RPMCFM @ 0.500-In. SPCFM @ 0.750-In. SPCFM @ 1.000-In. SPCFM @ 1.250-In. SPCFM @ 1.500-In. SPPrice (ex. VAT)
A
2C799
--------€3,549.96
A
7C507
Capacitor Start5647732552090---€4,391.84
A
7C892
Capacitor Start62542398034302880--€4,231.40
A
7C509
Capacitor Start71699-5250489044103635€4,941.33
A
7C893
Capacitor Start72745-5700542050504560€4,890.43
A
7C511
Three Phase66608466542603690--€4,895.98
A
7C895
Three Phase72745-5700542050504560€5,204.14
A
7C512
Three Phase71699-5250489044103635€4,968.98
A
7C510
Three Phase5647732552090---€4,251.74
A
7C894
Three Phase62542398034302880--€4,582.23

Backward Inclined Blowers, 18-1/4 Inch Wheel Diameter

Dayton belt-driven blowers are suitable for providing clean air circulation in industrial ventilation, restaurants and laboratory exhaust systems. These units feature non-overloading and dynamically balanced wheels for producing high-efficiency air volume with low rotational speeds. They also have OSHA complying guards to protect personnel from accidental contact with the fan blades and come with open drip-proof (ODP) enclosures that have ventilated openings to allow inflow of external cooling air directly over the motor windings to dissipate heat due to continuous operation. Choose from a wide range of these backward inclined blowers, available in blower speeds ranging between 477 and 745 rpm.

We are here to help!

Looking for a part not listed here?