DAYTON Blower 10 5/8 Inch, Galvanized Steel


Filter
Assembled/Unassembled: Unassembled , Bearing Type: Ball , Discharge Height (In.): 11.375 , Discharge Width (In.): 8.25 , Housing Finish: None , Housing Height: 17.5" , Housing Length: 16 5/16" , Housing Material: Galvanized Steel , Housing Width: 8.25" , Hz: 60 , Inlet Dia.: 10-7/8" , Max. Ambient Temp.: 104 F , Max. Blower RPM: 1350 , Max. Inlet Temp.: 150 Deg.F , Motor Enclosure: Open Dripproof , Mounting Position: Blower Shaft Horizontal , Shaft Dia.: 3/4" , Type: Belt Drive, Single Inlet Forward Curve With Drive Package , Wheel Diameter: 11 1/8" , Wheel Material: Steel , Wheel Width: 6.437"
StyleModelMotor HPBlower RPMCFM @ 0.125-In. SPMotor InsulationMotor RPMMotor TypePhaseRotationPrice (ex. VAT)
A
7HR66
111752060Class B1725Capacitor-Start1CCW Viewing Drive Side€1,258.32
A
7HR87
111752060Class F17353-Phase3CCW Viewing Drive Side€1,595.53
A
7HR17
111752060Class B1725Capacitor-Start1CW Viewing Drive Side€1,269.84
A
7HR29
111752060Class B17253-Phase3CW Viewing Drive Side€1,433.04
A
7HR30
1.513502380Class B17253-Phase3CW Viewing Drive Side€1,718.94
A
7HR88
1.513502380Class F17353-Phase3CCW Viewing Drive Side€1,642.08
A
7HR27
1/28501430Class B17253-Phase1CW Viewing Drive Side€1,470.75
A
7HR85
1/28501430Class B17253-Phase3CCW Viewing Drive Side€1,459.22
A
7HR64
1/28501430Class B1725Split-Phase1CCW Viewing Drive Side€1,121.54
A
7HR37
1/28501430Class B1725Split-Phase1CW Viewing Drive Side€1,133.07
A
7HR16
3/410501820Class B1725Split-Phase1CW Viewing Drive Side€1,269.00
A
7HR65
3/410501820Class B1725Split-Phase1CCW Viewing Drive Side€1,257.48
A
7HR28
3/410501820Class B17253-Phase3CW Viewing Drive Side€1,314.94
A
7HR86
3/410501820Class B17253-Phase3CCW Viewing Drive Side€1,303.42

Blower 10 5/8 Inch, Galvanized Steel

Dayton single inlet forward curve blowers are designed for quiet and efficient performance in industrial air moving applications. These units are equipped with dynamically balanced forward-curved steel wheels for inducing high air volume with a minimum rotation speed. They feature die stamped steel housing for structural rigidity and long term performance. They are provided with single-or-three phase motors with open drip-proof enclosures for circulating cool air and preventing water droplets from falling in the motor and damaging the moving parts. Choose from a wide range of these blowers, available in blower speeds ranging from 850 to 1350 rpm.

We are here to help!

Looking for a part not listed here?