BALDOR MOTOR Permanent Magnet SCR Drive DC Motors, Paint Free, Washdown Duty
Filter
| Style | Model | Voltage | Hp | Frame Material | Shaft Dia. | Full Load Amps | Finish | Type | Frame Size | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | CDPSWD3430 | 90V | 1/2 hp | Stainless Steel | 5/8" | 5.2A | Unfinished | 3428P | 56C | €2,049.46 | |
| A | CDPSWD3545 | 90V | 1 hp | Stainless Steel | 5/8" | 9.6A | Unfinished | 3536P | 56C | €3,028.27 | |
| B | CDPWD3320 | 90V | 1/3 hp | Steel | 5/8" | 3.2A | Epoxy Coating | 3327P | 56C | €1,525.98 | |
| B | CDPWD3330 | 90V | 1/2 hp | Steel | 5/8" | 9.5A | Epoxy Coating | 3336P | 56C | €1,907.48 | |
| A | CDPSWD3406 | 180V | 1/4 hp | Steel | 5/8" | 1.3A | Unfinished | 3413P | 56C | €1,730.43 | |
| A | CDPSWD3426 | 180V | 1/2 hp | Stainless Steel | 5/8" | 2.5A | Unfinished | 3428P | 56C | €2,049.46 | |
| A | CDPSWD3555 | 180V | 1 hp | Stainless Steel | 5/8" | 4.9A | Unfinished | 3536P | 56C | €3,028.27 | |
| B | CDPWD3326 | 180V | 1/2 hp | Steel | 5/8" | 2.5A | Epoxy Coating | 3336P | 56C | €1,716.23 | |
| B | CDPWD3455 | 180V | 1 hp | Steel | 5/8" | 5A | Epoxy Coating | 3435P | 56C | €2,525.60 | |
| B | CDPWD3575 | 180V | 1 1/2 hp | Steel | 7/8" | 7.7A | Epoxy Coating | 3536P | 145TC | €4,830.65 | |
| B | CDPWD3585 | 180V | 2 hp | Steel | 7/8" | 9.6A | Epoxy Coating | 3548P | 145TC | €5,543.47 | |
| B | CDPWD3605 | 180V | 5 hp | Steel | 1 1/8" | 24.5A | Epoxy Coating | 3681P | 1810ATC | €12,496.44 |
We are here to help!
Looking for a part not listed here?
Explore More
- ALTO SHAAM
- KEYSHAFT
- TOUGHSTRIPE
- WINDJAMMER LLC
- KINGSWAY GROUP
- Submersible Level Transmitters
- Cut-Resistant Sleeves
- Impact Bit Sets
- Temporary Strainers
- Chemical Metering Pump Systems
- REVCOR Propeller, 12 inch
- SALISBURY Class 00 Electrical Gloves Kit, 14 Inch, Red
- ANSELL 96-003 Activarmr Goatskin Leather Protector Gloves
- LOC-LINE Acid Resistant NPT Connectors
- ANVIL AF700 Series Universal Swivel Attachments
- WEATHERHEAD Male Run Tee 1/4-18 Inch
- PASS AND SEYMOUR Non Fusible Safety Switches
- CLE-FORCE Reduced Round Shank Silver & Deming Drills
- APPROVED VENDOR M16 x 1.5 Fully Threaded Zinc Plated Steel Hex Head Cap Screws
- DAYTON Uncoated Cables

