ALLPAX GASKET CUTTER SYSTEMS Arch Punches
Allpax arch punches are ideal for punching out bolt holes having sizes ranging from 3/16 to 2 inches. They can punch out precision-sized round holes in gaskets made of leather, rubber, plastic, sheet metal and other soft metals. They have a one-piece design that only require the use of a hamme...r / mallet for striking them & creating an impact force.Read more
Filter
A
B| Style | Model | Dia. | Height | Included | Material | Finish | No. Of Pieces | |
|---|---|---|---|---|---|---|---|---|
| A | AX1810 | 0.812" | - | - | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1821 | 1 1/2" | 2.562" | 1 1/2" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1817 | 1 1/4" | 1 3/4" | 1 1/4" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1815 | 1 1/8" | 1 7/8" | 1 1/8" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1819 | 1 3/8" | 2 1/2" | 1 3/8" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1824 | 1 7/8" | 2 1/2" | 1 7/8" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1816 | 1.187" | 1 7/8" | 1 3/16" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1818 | 1.312" | 1.812" | 1 5/16" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1805 | 1/2" | 0.938" | - | Forged Steel | Black Oxide | 1 | RFQ
|
| B | AX1825 | 2" | 3 1/4" | 2" Arch Punch | Forged Steel | Black Oxide | 1 | RFQ
|
| A | AX1809 | 3/4" | 1 3/4" | - | Forged Steel | Black Oxide | 1 | RFQ
|
Features
- Arch punches from Allpax have drop-forged steel construction with a black oxide finish for preventing bending / breaking under harsh usage, ensuring long-term operability.
- Their arch design safely transfers the impact force from a hammer on the punch handle to its cutting head.
- They have finely honed cutting edge that cuts out gasket material cleanly.
- Cutting head of the punching tool is equipped with an inside taper for quick & efficient clearing of punchings.
- Arch punches have their size stamped on them to avoid accidental choosing of a wrong-sized punch tool.
Frequently Asked Questions
How to operate Alpax arch punches?
- Secure the prepared gasket on a flat, hard surface.
- Mark the location of bolt holes on the gasket using a pencil or marker with appropriate spacing.
- Measure the size of the bolt hole and choose an appropriately sized arch punch.
- Place the cutting edge of the arch punch over the marked bolt hole on the gasket & strike the other end with a hammer.
- Remove the punched out material from the arch punch and repeat the process till all the bolt holes are punched out.
We are here to help!
Looking for a part not listed here?
Popular Search Queries
- Lockable Ball Valve
- Curved Jaw Coupling
- Spark Proof Centrifugal Blower
- Breathing Air Cascade System
- Thermal Expansion Valve
- Lay Flat Plastic Ducting
- Brass Valves
- Portable Carbon Monoxide Detector
- Explosion Proof Extension Cables
- Piston Accumulator
- Granite Surface Plate
- Explosion Proof Extension Cord
Explore More
- KEYSHAFT
- LOC-LINE
- CUSH-A-NATOR
- EXO
- TUFFTRAK SAFETY
- Scratch Awls
- Industrial Diaphragm Pumps
- Combination Wrench Sets
- Detent Lock Pop and Plunger Pins
- Display Cases
- ECKO Ventilation Ducts
- TURTLESKIN CP-500 Insider Gloves
- RUD CHAIN RM Eye Nuts, Metric Thread
- LAMP ESR3 Series Full Extension Drawer Slides
- MUELLER INDUSTRIES 125CI-N Iron Body Simplex Basket Strainers
- STA-KON THS8 Series Shrink Tubings
- BALDOR / DODGE Screw Conveyor Adapters
- KUNKLE Series 200H Safety Relief Valves
- NORTON ABRASIVES R766/R228 Gemini AO Coarse Grit TR Quick-Change Cloth Discs, Type III
- BURNDY Compression Pin Adapters