AEROQUIP 900598 Series O-Ring Boss Plugs
Eaton 900598 Series O-ring boss plugs are used in the food & beverage processing, chemical processing, marine / military and pulp & paper industries to provide a leak-tight seal in hydraulic systems.
Filter
A| Style | Model | Height | End Size 1 | Hex Size 1 | Working Pressure | Tube Od 1 | Max. Working Pressure @ 70f | Thread Size 1 | Seal Part Number If Included | Price | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | 900598-5S | 0.62" | 1/2" | 0.62" | 4000 psi | 5/16" | 5000 psi | - | - | €8.38 | |
| A | 900598-6S | 0.69" | 9/16" | 0.69" | 4000 psi | 3/8" | 7500 psi | 9/16"-18 | 22617-6 | €7.81 | |
| A | 900598-16S | 1 1/2" | 1 5/16" | 1 1/2" | 2500 psi | 1" | 4500 psi | 1 5/16"-12 | 22617-16 | €21.57 | |
| A | 900598-12S | 1 1/4" | 1 1/16" | 1 1/4" | 3000 psi | 3/4" | 5000 psi | 1 1/16"-12 | 22617-12 | €16.90 | |
| A | 900598-20S | 1 22/25" | 1 5/8" | 1 22/25" | 2000 psi | 1 1/4" | 2500 psi | 1 5/8"-12 | 22617-20 | €42.63 | |
| A | 900598-10S | 1" | 7/8" | 1" | 20684100 psi | 1/2" | 7500 psi | 7/8"-14 | 22617-10 | €11.39 | |
| A | 900598-32S | 2 3/4" | 2 1/2" | 2 3/4" | 1125 psi | 2" | 2000 psi | 2 1/2"-12 | 22617-32 | €156.43 | |
| A | 900598-24S | 2 3/25" | 1 7/8" | 2 3/25" | 1500 psi | 1/2" | 2500 psi | 1 7/8"-12 | 22617-24 | €56.67 | |
| A | 900598-4S | 14/25" | 7/16" | 14/25" | 4500 psi | 1/4" | - | 7/16"-20 | 22617-4 | €7.06 | |
| A | 900598-8S | 22/25" | 3/4" | 22/25" | 4000 psi | 1/2" | 7500 psi | 3/4"-16 | 22617-8 | €7.81 |
Features
- They have carbon steel construction for structural rigidity and prolonged service life.
- These O-ring boss plugs feature trivalent chromate zinc finish to resist corrosion on exposed surfaces.
- They can be operated at temperatures up to 250 degrees F.
- These O-ring boss plugs come with a straight-angle shape for enhanced performance during operations.
- They have an SAE ORB end for a tight seal and leakproof operations.
Standards and Approvals
- SAE
Frequently Asked Questions
What is the difference between straight thread and tapered thread O-ring boss plugs?
- Straight thread O-ring boss plugs have a straight thread that goes all the way to the bottom of the boss, whereas tapered-thread plug units have a tapered thread that stops the bottom of the boss.
- Straight thread plugs are typically stronger and more durable, but tapered thread plugs are easier to install and less prone to damage during installation.
How to maintain these O-ring boss plugs?
Regular inspection of the fittings and O-rings should be done to ensure their proper functioning and to prevent leaks.
How do I install these Eaton O-ring boss plugs?
- Ensure that the O-ring is properly seated in the groove on the plug.
- Then, thread the plug into the system until it is hand-tight.
- Fianlly tighten it with a wrench or socket to the specified torque.
We are here to help!
Looking for a part not listed here?
Explore More
- BISHAMON INDUSTRIES
- BISHOP-WISECARVER
- DAKE CORPORATION
- KEYSHAFT
- RINGERS GLOVES
- Pourers
- Synchronous Drive Gearbelts
- Sample Draw Pumps
- Predesigned Room Kits
- PLAST-O-MATIC EBVC Series Heavy Duty ON/OFF Actuator Ball Valves
- CONDOR Cowhide Leather Premium Gloves, Blue/Beige
- ANSELL 11-518 Hyflex Ultralight Polyurethane Cut Resistant Gloves
- DESTACO 533, 535 Series Heavy Duty Vertical Hold Down Clamps
- NORTH BY HONEYWELL RU6500 Series Silicone Full Facepiece Respirators with 5 Point Harnesses
- APPROVED VENDOR 1/4"-28 Fully Threaded Standard Phillips Pan Zinc Plated Steel Rounded Machine Screws
- CORONA TOOLS Bypass
- COSCO Step Stool
- REES 1 Inch Plastic Plungers
- SIOUX CHIEF Metal CTS/IPS Vinyl-Coated Steel Clamps With Screw