COLDER PRODUCTS COMPANY Quick-Disconnect Tube Fittings

Includes REACH-compliant, quick-disconnect inline, elbow and panel mount couplers and inserts for dripless and sterile plastic tubing applications in chemical handling, electronics, & food and beverage industries

Colder Products Corporation PMC Series, straight thru coupling inserts offer 1/8 inch, stream and are utilized in a wide assortment of useful applications. They feature CPC thumb locks and are simpler to use than ball-and-sleeve connectors. They also offer one-hand association and disengagement with integral terminations which make them comfortable for use and manufacture. Choose from a wide range of these PMC Series, straight thru coupling inserts, available in PTF, barbed, barb x insert and MNPT conections.

Colder Products Corporation PMC Series coupling bodies are engineered for connecting hoses / tubing in fluid / hydraulic circuits. They feature Buna-N O rings for a leak-tight seal upon installation and integral terminations for decreasing leakage points. Their acetal construction resists damage against mild chemicals & reactive fluids. Choose from a wide variety of these quick disconnect pipe adapters, available in PTF, barbed & MNPT connections on Raptor Supplies.

CPC PMC Series, Shut off coupling inserts have built-in shutoff valves which prevent spills in industrial applications including food and beverages, life science, and chemical processes. These inserts meet FDA, USDA, and NSF standards and work under temperature range of -40 Degrees to 180 Degrees F. Choose from a range of these PMC Series, Shut off coupling inserts, available in 0.5, 0.65, 0.72 and 0.58 body diameters.

Colder NS4 Series coupling bodies are made from polypropylene to withstand temperature ranging between 32 & 160 deg Fahrenheit and pressure up to 120 psi (8.3 bar). They feature glass-filled polypropylene with TPV over mould / ABS with TPE soft-touch over mould construction for resistance against water, acids & bases. They are equipped with EPDM O-rings for excellent ozone & chemical resistance properties. These coupling bodies ensure minimal leaks and air inclusions in the process line and minimise losses due to accidental disconnects. They offer a spillage rate of less than 0.1 mL. Choose from a wide range of these NS4 Series coupling bodies, available in MNPT, PTF and barbed connections on Raptor Supplies.

Colder NS4 Series coupling inserts feature a non-spill design to ensure minimal leaks and air inclusions in the process line and minimise losses due to accidental disconnects. These coupling inserts feature glass-filled polypropylene with TPV over mould / ABS with TPE soft-touch over mould construction for durability and resisting breakage. They are integrated with an EPDM O-ring for excellent chemical resistance and a shutoff valve for stopping the flow. Choose from a wide range of these NS4 Series coupling inserts, available in lengths ranging from 1.7 to 2.4 inches on Raptor Supplies.

Colder Products Corporation NS6 Series, shut off coupling bodies are used for transferring liquids & chemicals in refining facilities and manufacturing plants. The non-spill design of these coupling bodies virtually eliminates spills, reduces downtime and improves operator safety. These coupling bodies feature CPC thumb latches which enable one hand connections & disconnections and colour coded design ensures quick visual differentiation of fluid media lines. Choose from a wide range of these quick disconnect couplings, available in barbed, MNPT & compression connection types.

Colder Products Corporation NS6 Series couplings are suitable for transferring liquids & chemicals in manufacturing plants and refineries. These coupling inserts feature non-spill valves for minimising the downtime & preventing fluid spillage, thereby making these ideal for facilities adhering to strict environmental regulations. The CPC thumb latch and colour-coded design of these couplings enable one-hand operation (connection & disconnection) and visual differentiation of fluid media lines. Choose from a wide range of these quick-disconnect couplings available in barbed, MNPT & compression connection types.

Colder Products Corporation HFC12 Series, shut off coupling inserts offer higher flow in a compact size in comparison to many 1/2 inch flow couplings in a 3/8 inch body size. They have an user-friendly design and are equipped with a large, shrouded thumb latch for superior grip and are simple to operate. These inserts feature superior valve design which provides them greater flow and low spillage. Choose from a broad range of these HFC12 Series, shut off coupling inserts, available in Barb x Insert and MNPT x Insert types on Raptor Supplies.

Colder Products Company N2 Series coupling bodies are non-spill quick-disconnect fittings designed to prevent leaks and air bubbles in fluid lines. These fittings feature polypropylene construction and an EPDM O-ring for enhanced chemical resistance.These fittings have a twist-to-connect design for a secure fit and can withstand temperatures ranging from 32 to 160 degrees F.

Colder NS2 Series coupling inserts feature non-spill connect to allow safe disconnect under pressure, for a virtually leak-free fluid line connection. They are integrated with an ultra-low air inclusion feature to minimise contaminants and reduce line purging. These inserts feature a compact design to deliver high flow rates in a small connector. They come with a locking mechanism and double-sided, non-spill shutoff valves for safe operation. Choose from a wide range of these NS2 Series coupling inserts, available in MNPT, tube and barbed connections on Raptor Supplies.

Colder Products Corporation PLC Series coupling inserts are designed for transferring mild chemicals in chemical refining facilities. These couplings feature integral terminals that minimise the leak points and a CPC thumb latch for providing one-hand connection & disconnection. Additionally, their one-click installation design reduces the downtime. Choose from a wide range of these shut-off coupling bodies available in 1.150 - 1.950 inch lengths on Raptor Supplies.

Colder Products Corporation PMC Series coupling bodies are designed for connecting hoses / tubing in fluid / hydraulic circuits. These couplings feature Buna-N O-rings that ensure a leak-tight seal upon installation and integral terminations for minimising leakage points. Their acetal construction resists damage against mild chemicals & reactive fluids. Choose from a wide variety of these quick disconnect pipe adapters, available in PTF, barbed & MNPT connections on Raptor Supplies.

Colder Products Corporation PLC Series connectors are installed in fluid / air lines for refining and manufacturing applications. These coupling bodies feature Buna-N O-rings & integral terminations for minimising leakage points and a CPC thumb latch for enabling one handed connection / disconnection. The injection moulded acetal thermoplastic construction resists wear / damage against mild chemicals & abrasive fluids. Choose from a wide variety of these couplings, available in PTF, barbed & MNPT connections on Raptor Supplies.

Colder Products Corporation MC Series coupling inserts feature stainless steel springs and latches for a strong compression force. They can withstand pressures from vacuum to 250 psi and temperatures from -40 to 180 deg Fahrenheit. These couplings feature one-hand operation for swift connections & disconnections. They offer multiple configurations & terminations with both PMC acetal & PMC12 polypropylene couplings. Choose from a wide range of Colder MC Series coupling inserts, available in PTF, barbed & MNPT connection types on Raptor Supplies.

Colder Products Corporation LC Series, inline coupler bodies feature heavy duty chrome plated brass and are manufactured to last in most demanding applications. They offer flexibility of multiple configurations and terminations; ideal for both PLC acetal and PLC12 polypropylene couplings. These LC Series units also feature one-hand operations offering swift and easy connects and disconnects. Choose from an array of LC Series, inline coupler bodies, available in 3/8 and 1/4 inch outside diameters on Raptor Supplies.

Colder LC Series couplings are made of chrome-plated brass for elevated temperature or pressure applications. These couplings feature one-hand operation to allow easy connection & disconnection. They offer the flexibility of multiple configurations and terminations; ideal for both PLC acetal and PLC12 polypropylene couplings. These units have Buna-N O-rings for excellent tear & abrasion resistance. Choose from a wide range of Colder LC Series coupling inserts, available in PTF, barbed & MNPT connection types on Raptor Supplies.