STENS Parts

Comprises high-quality fuel / air / oil filters, bump feed heads, edger / lawn mower blades, closed spoons, engine stop switches, gas / fuel caps, kill-button switches, interlock switches and spec belts

Stens inner air filters remove dirt & debris from entering the engine for improved functioning of the lawnmower systems. They feature battery-powered sources, thereby providing a long time operation and environment-friendly performance.

Stens gas caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. Choose from a wide range of these gas caps, available in outer diameters ranging from 1-3/16 to 2 inches.

Stens OEM spec belts with 3/8 inch width are suitable for clutching actions in toro, tractors or wheel horses in outdoor drive applications. They feature raw edged / V belt / cogged or multi-ribbed belt types for dust & abrasion resistance, as well as can be used under severe load fluctuations while minimising shock & vibration. Choose from a broad range of these belts, available in lengths of 22, 25, 29, 33 and 34 inches.

Stens Star Edger blades are ideal for edging lawns running parallel to retaining walls or solid barriers. These non-sharpened blades are made of high carbon steel that is further heat treated for resisting bends, breakages and fractures, as well as for maximum durability. They feature 4-point edges to keep the hedges & shrubbery under control. These units can also be used as lawn aerators for making aerating holes before fertilising the lawns or spreading grass seeds. They are compatible with Trail Mate and Lesco edgers with a 9 inch outer diameter.

Stens fuel caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. These plastic caps feature threaded design for a liquid-tight seal and a fuel gauge to indicate the fuel level for timely refilling the fuel tanks. Choose from a wide range of these gas caps for fitting fuel tanks with depths ranging from 5 to 9 inches.

Stens trimmer heads are designed to fit straight-shaft string trimmers and release small sections of string, under high whipping force, to easily cut through weeds, grass and tough overgrowth. Selected models have large bottom covers that tap on the ground to advance the string line and allow the head to glide easily while trimming (making precise cuts each time). They feature inner walls that resist accumulation of dirt particles, and split eyelets for an extended service life. These units are compatible with Ariens, Dolmar, Echo, Homelite, Honda, Husqvarna and Makita trimmer lines.

Stens tygon fuel lines maintain air tight seals on fittings in extreme temperatures. They feature clear yellow colour having translucent material for allowing visual inspection of media flow and come in 50 inch length. Further, these oil & gas resistant pipes prevent swelling & hardening and are used in small engine fuel lines, lubrication lines & recreational vehicles.

Stens OEM spec belts are used to replace broken or worn parts and for clutching actions in landscape & gardening applications. They can withstand high loads, vibration, shock & environmental exposures and are available in cogged, covered, double V, raw edge, banded and multi-ribbed belt variants having length up to 190 inches.

Stens carburetors are used to replace damaged or faulty carburetors in engine blocks of gardening & lawn equipment and other machinery. They create an air-fuel mixture of varying concentrations for facilitating internal combustion inside an internal combustion engine. These carburetors vary depending engine size & air intake capacity and can handle fuel with a maximum of 10 % ethanol.

Stens transmission filters remove particles and contaminants from the transmission fluid and have anti-drain valves to allow oils to drain back into the engine. They are integrated with threads to permit required related accessories to be attached. The valves can operate at pressures ranging from 8 to 22 psi. Choose from a broad range of these transmission filters, available in 10 and 16 micron ratings for fine removal of particles.

Stens PTO ( power take-off ) switches replace worn-out or faulty PTO switches in garden & lawn equipment. They transfer mechanical power of the engines to the attached equipment that do not have their own engines or motors like rotating cutting blades in lawnmowers. These switches feature either the push-pull mechanism with a snap mount or a 1/2 inch mounting stem for controlling the switches. Choose from a wide range of these switches, available in 2-position 5-terminal and 2-position 8-terminal variants.

Stens fuel caps cover up fuel tanks of garden & lawn equipment and other equipment to prevent fuel from coming out and dust & contaminants from going in to cause engine problems. They also help to increase fuel efficiency by preventing fuel emissions or fumes from coming out of the tanks & polluting the environment due to irregular venting or evaporation. Selected models feature twist close & vented shutoff option for quick closing of the caps & pressure release from the tanks, respectively.

Stens air filter combos help engines to run efficiently for a long time by blocking many contaminants such as dirt, pollen, insects & dust in small engine outdoor power equipment. They allow sufficient amounts of air to flow through the system and feature exact-fit design, thereby ensuring high-level protection for the engines & easy installation of the filters. Choose from a wide range of these combos, available in lengths up to 8 inches.

Stens engine stop switches manually stop or shut off the power passing to the engines and are compatible with selected Honda engine models. They feature plates that include on / off indicators to start or shut down the engines and are configured with 3/4 inch mounting stems for easy installation.

Stens interlock switches allow current to pass to the machines when they are safe to operate and prevent the start of machinery when the guards are open. They feature 2 or 4 terminal connectors for direct connection to the equipment in electrical applications and have double pole sockets to control two separate circuits, thereby ensuring safe isolation of the load circuit. Further, these switches come with normally open or normally closed types for off & on functions, respectively.