MICRO 100 Indexable End Mills

Filter

MICRO 100 -

End Mills, Single Flute, Downcut Router

Style	Model	Shank Dia.	Cutter Dia.	Length Of Cut	List Number	Measurement System	Dimensions Type	Primary Material Application	Primary Material Application Iso Code	Price
A	SFL-187-45	1/4"	3/16"	5/8"	SFL	Fractional Inch	Fractional Inch	Composite	O	€58.91
A	SFLM-040-10	4 mm	4 mm	12 mm	SFLM	Metric	Metric	Composite	O	€58.24
B	SFLM-050-40	6 mm	5 mm	16 mm	SFLM	Metric	-	Composite	O	€79.44

MICRO 100 -

End Mills, Diamond Cut, Fish Tail End Cut

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Length Of Cut	Primary Material Application	Primary Material Application Iso Code	Material	Material-machining	Price
A	RDE-110	1/2"	1"	1/2"	-	Composite	O	Carbide	Carbide	€127.33
B	RDE-60	1/4"	-	1/4"	3/4"	Composite	O	Carbide	Carbide	€45.11
A	RDE-80	1/4"	-	1/4"	1"	Composite	O	Carbide	Carbide	€67.39
B	RDE-30	1/8"	-	1/8"	1/2"	Composite	O	Carbide	Carbide	€29.79
A	RDE-100	3/8"	1"	3/8"	-	Composite	O	Carbide	Carbide	€96.27
A	RDE-40	3/16"	5/8"	3/16"	-	Composite	O	Carbide	Carbide	€33.62

MICRO 100 -

End Mills, Single Flute, Upcut Router, Square

Style	Model	Shank Dia.	Cutter Dia.	Length Of Cut	Primary Material Application	Primary Material Application Iso Code	Material	Material-machining	Finish	Price
A	SFPM-030-70	6 mm	3 mm	18 mm	Composite	O	Carbide	Carbide	Uncoated	€63.30
A	SFPM-100-30	10 mm	10 mm	30 mm	Composite	O	Carbide	Carbide	Uncoated	€136.19

MICRO 100 -

End Mills, Ball, Reduced Neck

Style	Model	Primary Material Application Iso Code	Cutting Length	Milling Dia.	Cutter Dia.	Cutting Type	Reach	Finish-machining	Neck Dia.	Price
A	SFBM-030-15	K, M, N, O, P, S	4 mm	3 mm	3 mm	Center	15 mm	Bright (Uncoated)	2.9 mm	€71.74
A	SFBM-060-12	K, M, N, O, P, S	7.5 mm	6 mm	6 mm	Center	12.2 mm	Bright (Uncoated)	5.9 mm	€62.74
A	SFBM-002-0	K, M, N, O, P, S	0.3 mm	0.2 mm	0.2 mm	Center	0.3 mm	Bright (Uncoated)	-	€109.99
B	SFBM-040-10X	M, N, P, S	5 mm	4 mm	4 mm	Center Cutting	10 mm	-	3.9 mm	€80.55
A	SFBM-008-8X	M, P, S	0.8 mm	0.8 mm	0.8 mm	Center	8 mm	AlTiN	0.75 mm	€102.33
A	SFBM-005-1X	M, P, S	0.6 mm	0.5 mm	0.5 mm	Center	1.6 mm	AlTiN	0.45 mm	€99.36
A	SFBM-015-9X	M, P, S	1.5 mm	1.5 mm	1.5 mm	Center	9.5 mm	AlTiN	1.45 mm	€85.96
C	SFBM-060-12X	M, P, S	7.5 mm	6 mm	6 mm	Center	12.2 mm	AlTiN	5.9 mm	€70.87
A	SFBM-008-5X	M, P, S	0.8 mm	0.8 mm	0.8 mm	Center	5.2 mm	AlTiN	0.75 mm	€91.96
A	SFBM-050-11X	M, P, S	6 mm	5 mm	5 mm	Center	11 mm	AlTiN	4.9 mm	€71.46
A	SFBM-020-9X	M, P, S	2.5 mm	2 mm	2 mm	Center	9.5 mm	AlTiN	1.95 mm	€83.27

MICRO 100 -

End Mills, Diamond Cut, Burr End Cut

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Primary Material Application	Primary Material Application Iso Code	Material	Material-machining	Finish	Price
A	RDB-110	1/2"	1"	1/2"	Composite	O	Carbide	Carbide	Uncoated	€131.01
B	RDB-60	1/4"	3/4"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€40.49
C	RDB-70	1/4"	3/4"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€42.66
C	RDB-80	1/4"	1"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€56.75
D	RDB-10	1/8"	0.188"	1/16"	Composite	O	Carbide	Carbide	Uncoated	€23.54
D	RDB-20	1/8"	3/8"	0.0938"	Composite	O	Carbide	Carbide	Uncoated	€23.54
D	RDB-30	1/8"	1/2"	1/8"	Composite	O	Carbide	Carbide	Uncoated	€23.54
C	RDB-100	3/8"	1"	3/8"	Composite	O	Carbide	Carbide	Uncoated	€100.57
D	RDB-40	3/16"	5/8"	3/16"	Composite	O	Carbide	Carbide	Uncoated	€33.62

MICRO 100 -

End Mills, Diamond Cut, End Mill End Cut

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Primary Material Application	Primary Material Application Iso Code	Material	Material-machining	Finish	Price
A	RDC-70	1/4"	3/4"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€43.18
A	RDC-80	1/4"	1"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€57.81
A	RDC-50	1/4"	5/8"	3/16"	Composite	O	Carbide	Carbide	Uncoated	€38.06
A	RDC-60	1/4"	3/4"	1/4"	Composite	O	Carbide	Carbide	Uncoated	€41.30
A	RDC-20	1/8"	3/8"	0.0938"	Composite	O	Carbide	Carbide	Uncoated	€23.54
A	RDC-30	1/8"	1/2"	1/8"	Composite	O	Carbide	Carbide	Uncoated	€23.54
A	RDC-40	3/16"	5/8"	3/16"	Composite	O	Carbide	Carbide	Uncoated	€33.62

MICRO 100 -

VLM Corner Radius, End Mills, Variable Helix, Long Flute

Style	Model	Shank Dia.	Primary Material Application Iso Code	Cutting Length	Finish	No. Of Flutes	Milling Dia.	End Mill Style	End Type	Price
A	VLM-312-4	-	-	-	UN	-	-	-	-	-	RFQ
B	VLM-625-5	-	-	-	UN	5	-	-	-	€298.50
C	VLM-500-5-060	1/2"	H, S	1 3/4"	Bright Uncoated	5	1/2"	Corner Radius	Single End	€183.39
D	VLM-500-4X	1/2"	S	2 1/4"	-	4	1/2"	Corner Radius	Single	-	RFQ
C	VLM-500-5-090	1/2"	H, S	1 3/4"	Bright Uncoated	5	1/2"	Corner Radius	Single End	€174.18
E	VLM-500-5K	1/2"	H, S	1 3/4"	nACRo	5	1/2"	Square	Single End	-	RFQ
C	VLM-375-5-020	3/8"	H, S	1 1/4"	Bright Uncoated	5	3/8"	Corner Radius	Single End	€102.87
D	VLM-625-4X	5/8"	S	2 1/4"	AlTiN	4	5/8"	Corner Radius	Corner Radius	-	RFQ
C	VLM-312-5-020K	5/16"	H, S	1 1/8"	nACRo	5	5/16"	Corner Radius	Single End	€97.65
D	VLM-312-4X	5/16"	S	1 1/8"	AlTiN	4	5/16"	Corner Radius	Corner Radius	-	RFQ

MICRO 100 -

Carbide Ball End Mills, Metric

Style	Model	Cutting Length	Milling Dia.	Neck Dia.	Neck Length	Dia.	End Type	Shank Dia.	Primary Material Application	Price
A	SFBM-003-1	0.4 mm	0.3 mm	0.25 mm	0.6 mm	0.3 mm	Ball Nose	6 mm	All Materials	€117.92
A	SFBM-015-9	1.5 mm	1.5 mm	1.45 mm	8 mm	1.5 mm	Single End	6 mm	All Materials	€94.16
B	SFBM-020-9	2.5 mm	2 mm	1.95 mm	7 mm	2 mm	Single End	6 mm	All Materials	€74.86
A	SFBM-030-8	4 mm	3 mm	2.9 mm	8 mm	3 mm	Single End	6 mm	All Materials	€80.92
C	SFBM-060-25	7.5 mm	6 mm	5.9 mm	17.5 mm	6 mm	Ball Nose	6 mm	All Materials	-	RFQ

MICRO 100 -

Carbide Ball End Mills, Metric, AlTiN Coated

Style	Model	Primary Material Application Iso Code	Cutting Length	Milling Dia.	Cutting Type	Neck Length	Dia.	Finish	Neck Dia.	Price
A	SFBM-004-1X	M, N, P, S	0.5 mm	0.4 mm	Center Cutting	-	-	Aluminum Titanium Nitride	-	€132.86
A	SFBM-003-0X	M, N, P, S	0.4 mm	0.3 mm	Center Cutting	-	-	Aluminum Titanium Nitride	-	€136.23
B	SFBM-002-0X	M, P, S	0.3 mm	0.2 mm	Center	Not Applicable	0.2 mm	-	-	€158.76
B	SFBM-010-3X	M, P, S	1.3 mm	1 mm	Center	2 mm	1 mm	-	0.95 mm	€108.57
B	SFBM-030-15X	M, P, S	4 mm	3 mm	Center	11 mm	3 mm	AlTiN	2.9 mm	€96.58
B	SFBM-030-8X	M, P, S	4 mm	3 mm	Center	4 mm	3 mm	-	2.9 mm	€90.87

MICRO 100 -

Corner Radius End Mills, 2 Flute, Reduced Neck

Style	Model	Shank Dia.	Cutting Length	Finish-machining	Milling Dia.	Neck Dia.	Neck Length	End Type	Corner Radius	Price
A	MMRM-120-25	-	-	Bright (Uncoated)	-	-	-	-	-	-	RFQ
A	MMRM-100-25	-	-	Bright (Uncoated)	-	-	-	-	-	-	RFQ
B	MMRM-008-5	4 mm	0.8 mm	Bright (Uncoated)	0.8 mm	0.78 mm	4.2 mm	Corner Radius	0.1 mm	-	RFQ
B	MMRM-008-16X	4 mm	0.8 mm	AlTiN	0.8 mm	0.78 mm	15.2 mm	Corner Radius	0.1 mm	-	RFQ
C	MMRM-008-10X	4 mm	0.8 mm	AlTiN	0.8 mm	0.78 mm	10 mm	Single End	0.1 mm	€52.98
B	MMRM-005-5	4 mm	0.5 mm	Bright (Uncoated)	0.5 mm	0.48 mm	4.5 mm	Corner Radius	0.05 mm	-	RFQ
C	MMRM-008-10	4 mm	0.8 mm	Bright (Uncoated)	0.8 mm	0.78 mm	9.2 mm	Single End	0.1 mm	€48.27
C	MMRM-008-16	4 mm	0.8 mm	Bright (Uncoated)	0.8 mm	0.78 mm	15.2 mm	Corner Radius	0.1 mm	€58.99
B	MMRM-012-15X	6 mm	1.2 mm	AlTiN	1.2 mm	1.15 mm	13.8 mm	Corner Radius	0.1 mm	-	RFQ
C	MMRM-060-11X	6 mm	6 mm	AlTiN	6 mm	5.8 mm	5 mm	Single End	1 mm	€61.70
B	MMRM-050-30X	6 mm	5 mm	AlTiN	5 mm	4.8 mm	25 mm	Corner Radius	0.5 mm	-	RFQ
B	MMRM-040-9X	6 mm	4 mm	AlTiN	4 mm	3.8 mm	5 mm	Corner Radius	0.25 mm	-	RFQ
C	MMRM-040-15X	6 mm	4 mm	AlTiN	4 mm	3.8 mm	11 mm	Single End	0.25 mm	€61.41
C	MMRM-030-8	6 mm	3 mm	Bright (Uncoated)	3 mm	2.9 mm	5 mm	Single End	0.25 mm	€64.78
B	MMRM-030-15X	6 mm	3 mm	AlTiN	3 mm	2.9 mm	12 mm	Corner Radius	0.25 mm	-	RFQ
C	MMRM-020-7X	6 mm	2 mm	AlTiN	2 mm	1.9 mm	5 mm	Corner Radius	0.2 mm	-	RFQ
B	MMRM-020-7	6 mm	2 mm	Bright (Uncoated)	2 mm	1.9 mm	5 mm	Corner Radius	0.2 mm	-	RFQ
C	MMRM-015-7	6 mm	1.5 mm	Bright (Uncoated)	1.5 mm	1.45 mm	5.5 mm	Single End	0.15 mm	€53.40
C	MMRM-015-25	6 mm	1.5 mm	Bright (Uncoated)	1.5 mm	1.45 mm	23.5 mm	Single End	0.15 mm	€53.40
B	MMRM-015-15X	6 mm	1.5 mm	AlTiN	1.5 mm	1.45 mm	13.5 mm	Corner Radius	0.15 mm	-	RFQ
B	MMRM-030-30X	6 mm	3 mm	AlTiN	3 mm	2.9 mm	27 mm	Corner Radius	0.25 mm	-	RFQ
B	MMRM-040-30X	6 mm	4 mm	AlTiN	4 mm	3.8 mm	26 mm	Corner Radius	0.25 mm	-	RFQ
C	MMRM-010-8	6 mm	1 mm	Bright (Uncoated)	1 mm	0.95 mm	7 mm	Single End	0.1 mm	€62.56
C	MMRM-015-15	6 mm	1.5 mm	Bright (Uncoated)	1.5 mm	1.45 mm	13.5 mm	Single End	0.15 mm	€53.40
B	MMRM-010-5X	6 mm	1 mm	AlTiN	1 mm	0.95 mm	5 mm	Corner Radius	0.1 mm	-	RFQ

MICRO 100 -

AECM/GEC Corner Radius End Mills

Style	Model	Shank Dia.	Cutting Length	Primary Material Application Iso Code	Finish-machining	End Mill Cutting Type	Finish	No. Of Flutes	Corner Radius	Price
A	AECM-1005-2	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-625-3-090	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	AECM-1015-4	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-625-2-060	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-625-2-020	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-750-2-020	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-001-2-030	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-001-2-090	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-625-3-030	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-001-2-020	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
A	GEC-312-2-020	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	-	-	-	RFQ
B	GEC-001-2-125	-	-	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	2	1/8"	€562.00
C	AECM-1005-4	1 mm	25 mm	M, P	Bright (Uncoated)	Center Cutting	Uncoated	4	0.5 mm	€61.19
D	GEC-001-2-060	1"	1 1/2"	-	Bright (Uncoated)	Center Cutting	Bright (Uncoated)	2	0.06"	€443.00
E	GEC-500-4-010X	1/2"	1"	H, M, P	AlTiN	Center Cutting	AlTiN	4	0.01"	€129.20
F	GEC-500-3-030X	1/2"	1"	H, M, P	AlTiN	Center Cutting	-	3	0.03"	-	RFQ
E	GEC-500-4-010	1/2"	1"	M, P	Bright (Uncoated)	Center Cutting	Uncoated	4	0.01"	€115.42
G	GEC-500-3-030	1/2"	1"	M, P	Bright (Uncoated)	Center Cutting	Uncoated	3	0.03"	€115.42
H	GEC-250-2-010	1/4"	3/4"	M, P	Bright (Uncoated)	Center Cutting	Uncoated	2	0.01"	-	RFQ
G	GEC-250-3-030	1/4"	3/4"	M, P	Bright (Uncoated)	Center Cutting	Uncoated	3	0.03"	€48.53
I	GEC-250-4-030X	1/4"	3/4"	H, M, P	AlTiN	Center Cutting	AlTiN	4	0.03"	€56.70
I	GEC-250-4-020X	1/4"	3/4"	H, M, P	AlTiN	Center Cutting	AlTiN	4	0.02"	€56.70
I	GEC-250-4-010X	1/4"	3/4"	H, M, P	AlTiN	Center Cutting	AlTiN	4	0.01"	€56.70
G	GEC-250-3-030X	1/4"	3/4"	H, M, P	AlTiN	Center Cutting	AlTiN	3	0.03"	€56.70
G	GEC-250-3-020X	1/4"	3/4"	H, M, P	AlTiN	Center Cutting	AlTiN	3	0.02"	€56.70

MICRO 100 -

HMCM Corner Radius End Mills

Style	Model	Shank Dia.	Cutting Length	Primary Material Application Iso Code	Finish	Finish-machining	End Mill Cutting Type	Corner Radius	Milling Dia.	Price
A	HMCM-2015-4	-	-	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	-	-	-	RFQ
A	HMCM-2030-4	-	-	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	-	-	-	RFQ
A	HMCM-0810-4	-	-	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	-	-	-	RFQ
B	HMCM-1020-4	-	-	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	-	-	€178.18
C	HMCM-0405-4	6 mm	11 mm	H, M, P	Uncoated	Bright (Uncoated)	Center Cutting	0.5 mm	4 mm	€109.99
D	HMCM-0510-4X	6 mm	13 mm	H, M, P	AlTiN	AlTiN	Center Cutting	1 mm	5 mm	€157.87
C	HMCM-0610-4X	6 mm	13 mm	H, M, P	-	AlTiN	Center Cutting	1 mm	6 mm	€128.97
C	HMCM-0305-4X	6 mm	8 mm	H, M, P	AlTiN	AlTiN	Center Cutting	0.5 mm	3 mm	€120.31
C	HMCM-0805-4X	8 mm	19 mm	H, M, P	AlTiN	AlTiN	Center Cutting	0.5 mm	8 mm	€165.88
E	HMCM-0820-4	8 mm	19 mm	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	2 mm	-	€128.04
F	HMCM-0815-4X	8 mm	19 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	1.5 mm	8 mm	€179.99
C	HMCM-1005-4	10 mm	22 mm	H, M, P	Uncoated	Bright (Uncoated)	Center Cutting	0.5 mm	10 mm	€144.37
C	HMCM-1005-4X	10 mm	22 mm	H, M, P	AlTiN	AlTiN	Center Cutting	0.5 mm	10 mm	€179.74
F	HMCM-1205-4X	12 mm	26 mm	H	Aluminum Titanium Nitride	-	-	0.5 mm	12 mm	€203.32
F	HMCM-1210-4X	12 mm	26 mm	-	Aluminum Titanium Nitride	-	-	1 mm	12 mm	€250.58
F	HMCM-1215-4X	12 mm	26 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	1.5 mm	12 mm	€250.58
F	HMCM-1620-4X	16 mm	32 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	2 mm	16 mm	€522.22
F	HMCM-1610-4X	16 mm	32 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	1 mm	16 mm	€522.22
F	HMCM-2020-4X	20 mm	38 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	2 mm	20 mm	€668.05
G	HMCM-2010-4X	20 mm	38 mm	H, M, P	AlTiN	AlTiN	Center Cutting	1 mm	20 mm	€659.96
F	HMCM-2030-4X	20 mm	38 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	3 mm	20 mm	€668.05
F	HMCM-2015-4X	20 mm	38 mm	H	Aluminum Titanium Nitride	AlTiN	Corner Radius	1.5 mm	20 mm	€668.05
E	HMCM-2020-4	20 mm	38 mm	-	Bright (Uncoated)	Bright (Uncoated)	Center Cutting	2 mm	-	€522.32

MICRO 100 -

VHS/VHSM/VHM/VHMM Corner Radius End Mills

Style	Model	Shank Dia.	Primary Material Application Iso Code	Cutting Length	Finish	No. Of Flutes	List Number	End Type	Cutting Type	Price
A	VHM-5125-5K	-	-	-	Nacro	5	-	-	-	€170.57
B	VHM-375-4	-	-	-	Bright (Uncoated)	-	-	-	-	-	RFQ
B	VHMM-120-4	-	-	-	UN	-	-	-	-	-	RFQ
B	VHMM-080-4	-	-	-	UN	-	-	-	-	-	RFQ
C	VHS-250-4	-	-	-	UN	4	-	-	-	€71.36
B	VHSM-080-4	-	-	-	UN	-	-	-	-	-	RFQ
B	VHSM-040-4	-	-	-	UN	-	-	-	-	-	RFQ
D	VHM-5125-5	-	-	-	UN	5	-	-	-	€147.73
B	VHSM-100-4	-	-	-	UN	-	-	-	-	-	RFQ
E	VHM-001-4X	1"	S	1 1/2"	AlTiN	4	VHM	Corner Radius	Center	-	RFQ
F	VHM-500-5K	1/2"	H, S	1"	nACRo	5	VHM	Single End	Center Cutting	€181.61
G	VHM-500-5-125	1/2"	S	1"	Bright Uncoated	5	VHM	Single End	Center Cutting	€116.60
H	VHS-500-4X	1/2"	S	5/8"	AlTiN	4	VHS	Corner Radius	Center	€129.22
I	VHS-500-5K	1/2"	H, S	5/8"	nACRo	5	VHS	Single End	Center Cutting	€126.48
G	VHM-500-5-090K	1/2"	H, S	1"	-	5	VHM	Single End	Center Cutting	€134.86
J	VHS-500-5-090K	1/2"	H, S	5/8"	nACRo	5	VHM	Single End	Center Cutting	€145.39
J	VHS-250-5-020	1/4"	H, S	1/2"	Bright Uncoated	5	VLR	Single End	Center Cutting	€47.48
K	VHS-250-5	1/4"	S	1/2"	Bright Uncoated	5	VLR	Single End	Center Cutting	€54.22
F	VHM-250-5	1/4"	S	3/4"	Bright Uncoated	5	VHM	Single End	Center Cutting	€55.99
L	VHM-125-4X	1/8"	S	1/2"	AlTiN	4	VHM	Single End	Center	€32.83
F	VHM-750-5	3/4"	S	1 1/2"	Bright Uncoated	5	VHM	Single End	Center Cutting	€334.68
H	VHS-375-4X	3/8"	S	5/8"	AlTiN	4	VHS	Corner Radius	Center	-	RFQ
J	VHS-375-5-020	3/8"	H, S	5/8"	Bright Uncoated	5	VLR	Single End	Center Cutting	€65.25
E	VHMM-040-4X	4 mm	S	11 mm	AlTiN	4	VHMM	Corner Radius	Center	-	RFQ
G	VHMM-040-5K	4 mm	H, S	11 mm	nACRo	5	VHMM	Single End	Center Cutting	€59.24

MICRO 100 -

Corner Radius, End Mills, 4 Flute, Variable Helix

Style	Model	Shank Dia.	Primary Material Application Iso Code	Cutting Length	Neck Dia.	No. Of Flutes	Milling Dia.	Neck Length	End Mill Style	Price
A	VLR-750-4	-	-	-	0.73"	4	-	-	-	€526.97
B	VLRM-100-4	-	-	-	-	-	-	-	-	-	RFQ
B	VLRM-160-4	-	-	-	-	-	-	-	-	-	RFQ
C	VLR-500-5-090K	1/2"	H, S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€280.24
C	VLR-500-5-125K	1/2"	H, S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€250.44
C	VLR-500-5-030K	1/2"	H, S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€242.15
C	VLR-500-5-060	1/2"	S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€220.94
C	VLR-500-5-090	1/2"	H, S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€254.47
D	VLR-500-5K	1/2"	H, S	1"	15/32"	5	1/2"	3 1/2"	Square	-	RFQ
C	VLR-500-5-030	1/2"	S	1"	15/32"	5	1/2"	3 1/2"	Corner Radius	€220.94
E	VLR-250-4X	1/4"	S	1/2"	7/32"	4	1/4"	2"	Corner Radius	€80.16
D	VLR-250-5K	1/4"	H, S	1/2"	7/32"	5	1/4"	2"	Square	-	RFQ
C	VLR-375-5-020	3/8"	S	3/4"	11/32"	5	3/8"	2"	Corner Radius	€124.66
D	VLR-375-5K	3/8"	H, S	3/4"	11/32"	5	3/8"	2"	Square	€157.27
C	VLR-375-5-020K	3/8"	H, S	3/4"	11/32"	5	3/8"	2"	Corner Radius	€159.82
F	VLR-187-4X	3/16"	S	3/8"	5/32"	4	3/16"	1 5/8"	Corner Radius	-	RFQ
E	VLR-625-4X	5/8"	S	1 1/4"	41/64"	4	5/8"	3 1/4"	Corner Radius	€354.62
C	VLR-312-5-020	5/16"	S	5/8"	9/32"	5	5/16"	2 1/32"	Corner Radius	€103.69
E	VLR-312-4X	5/16"	S	5/8"	9/32"	4	5/16"	2 1/32"	Corner Radius	€112.75
G	VLRM-080-4X	8 mm	S	10 mm	7.49 mm	4	8 mm	40 mm	Corner Radius	€114.80

MICRO 100 -

Square End Mills, 2 Flute, Solid Carbide

Style	Model	Shank Dia.	Cutting Length	Primary Material Application Iso Code	Milling Dia.	List Number	End Type	Finish-machining	Dimensions Type	Price
A	RME-013-2X	1/8"	0.039"	H, K, M, P	0.013"	RME	Single End	AlTiN	Decimal Inch	€63.29
B	RME-011-2	1/8"	0.033"	K, M, P, S	0.011"	RME	Square	Bright (Uncoated)	Decimal Inch	-	RFQ
A	RME-012-2	1/8"	0.036"	K, M, P, S	0.012"	RME	Single End	Bright (Uncoated)	Decimal Inch	€58.32
A	RME-021-2	1/8"	0.063"	K, M, P, S	1/64"	RME	Single End	Bright (Uncoated)	Decimal Inch	€43.17
A	RME-028-2	1/8"	0.084"	K, M, P, S	1/64"	RME	Single End	Bright (Uncoated)	Decimal Inch	-	RFQ
A	RME-040-2X	1/8"	3/25"	H, K, M, P	1/32"	RME	Single End	AlTiN	Decimal Inch	€41.38
A	RMEM-007-2X	3 mm	2.1 mm	H, K, M, P	0.7 mm	RMEM	Single End	AlTiN	Metric	€41.25
A	RMEM-014-2X	3 mm	4.2 mm	H, K, M, P	1.4 mm	RMEM	Single End	AlTiN	Metric	€41.25
A	RMEM-011-2X	3 mm	3.3 mm	H, K, M, P	11 mm	RMEM	Single End	AlTiN	Metric	€41.25
A	RMEM-025-2X	3 mm	8 mm	H, K, M, P	2.5 mm	RMEM	Single End	AlTiN	Metric	€32.61
C	RMEM-017-2X	3 mm	5.1 mm	-	1.7 mm	RMEM	Single End	-	-	€38.51
A	RMEM-005-2X	3 mm	1.5 mm	H, K, M, P	0.5 mm	RMEM	Single End	AlTiN	Metric	€38.45
A	RMEM-015-2X	3 mm	4.2 mm	H, K, M, P	1.5 mm	RMEM	Single End	AlTiN	Metric	€41.25
A	RMEM-020-2X	3 mm	6 mm	H, K, M, P	2 mm	RMEM	Single End	AlTiN	Metric	€32.61

MICRO 100 -

GEL/GELM/AELM Square End Mills, Long Flute

Style	Model	Shank Dia.	Cutting Length	Primary Material Application Iso Code	No. Of Flutes	Finish	Milling Dia.	List Number	End Type	Price
A	GELM-050-4	-	-	-	-	Bright (Uncoated)	-	-	-	-	RFQ
A	GELM-250-3	-	-	-	-	Bright (Uncoated)	-	-	-	-	RFQ
B	GELM-180-2	-	-	-	2	Bright (Uncoated)	-	-	-	€368.57
B	GELM-180-3	-	-	-	3	Bright (Uncoated)	-	-	-	€368.57
C	GEL-500-2	1/2"	3"	H, M, P	2	Bright	1/2"	Gel	Single End	€135.47
D	GEL-500-2X	1/2"	3"	M, P, S	2	AlTiN	1/2"	Gel	Square	-	RFQ
E	GEL-250-4	1/4"	1 1/2"	M, P, S	4	Bright	1/4"	Gel	Single End	€77.95
F	GEL-375-2	3/8"	1 3/4"	M, P, S	2	Bright	3/8"	Gel	Single End	€82.55
D	GEL-375-2X	3/8"	1 3/4"	M, P, S	2	AlTiN	3/8"	Gel	Square	-	RFQ
D	GEL-187-2X	3/16"	1 1/8"	M, P, S	2	-	0.188"	Gel	Square	€53.36
F	GELM-040-2X	4 mm	25 mm	M, P, S	2	AlTiN	4 mm	GELM	Single End	€53.37
E	GELM-060-4	6 mm	25 mm	M, P, S	4	Bright	6 mm	GELM	Single End	€57.53
G	AELM-030-4X	6 mm	15 mm	H, M, P, S	4	-	3 mm	AELM	Square	€76.42
H	AELM-030-4	6 mm	15 mm	M, P, S	4	Uncoated	3 mm	AELM	Single End	€60.72
I	AELM-020-4X	6 mm	10 mm	H, M, P, S	4	AlTiN	2 mm	AELM	Single End	-	RFQ
J	GELM-060-3	6 mm	25 mm	M, P, S	3	Bright	6 mm	GELM	Single End	€55.76
K	AELM-040-2X	6 mm	20 mm	H, M, P, S	2	-	4 mm	AELM	Single End	€60.60
J	GELM-080-3	8 mm	30 mm	M, P, S	3	Bright	8 mm	GELM	Single End	€67.15
J	GELM-100-3X	10 mm	38 mm	M, P, S	3	AlTiN	10 mm	GELM	Square	€118.66
H	AELM-100-4	10 mm	50 mm	M, P, S	4	Bright	10 mm	AELM	Single End	-	RFQ
H	AELM-120-4	12 mm	55 mm	M, P, S	4	Bright	12 mm	AELM	Single End	€144.68
L	AELM-140-2X	14 mm	60 mm	-	2	AlTiN	14 mm	AELM	Single End	€319.24
H	AELM-160-4X	16 mm	65 mm	H, M, P, S	4	-	16 mm	AELM	Square	-	RFQ
L	GELM-180-2X	18 mm	75 mm	-	2	AlTiN	18 mm	GELM	Single End	€362.80
L	AELM-200-2X	20 mm	75 mm	-	2	AlTiN	20 mm	AELM	Single End	€491.51

MICRO 100 -

SHR/SHRM/SHL/SHLM Square End Mills

Style	Model	Shank Dia.	Cutting Length	Primary Material Application Iso Code	Finish	Milling Dia.	Cutting Type	Cutter Dia.	End Mill Material	Price
A	SHLM-100-4	-	-	-	UN	-	-	-	-	-	RFQ
A	SHLM-060-4	-	-	-	UN	-	-	-	-	-	RFQ
A	SHRM-140-4	-	-	-	UN	-	-	-	-	-	RFQ
A	SHRM-060-4	-	-	-	UN	-	-	-	-	-	RFQ
B	SHR-500-4X	1/2"	1"	H, S	AlTiN	1/2"	Center	1/2"	Carbide	€151.75
C	SHL-500-4X	1/2"	2"	H, S	-	1/2"	Center	1/2"	Carbide	€194.55
D	SHR-500-4	1/2"	1"	-	UN	-	-	1/2"	-	€128.97
B	SHR-250-4X	1/4"	3/4"	H, S	-	1/4"	Center	1/4"	Carbide	€75.74
C	SHL-250-4X	1/4"	1 1/8"	H, S	-	1/4"	Center	1/4"	Carbide	€94.33
C	SHL-750-4X	3/4"	2 1/2"	H, S	-	3/4"	Center	3/4"	Carbide	€465.24
B	SHR-750-4X	3/4"	1 1/2"	H, S	AlTiN	3/4"	Center	3/4"	Carbide	€366.89
C	SHL-375-4X	3/8"	1 1/4"	H, S	-	3/8"	Center	3/8"	Carbide	€138.11
B	SHR-375-4X	3/8"	7/8"	H, S	-	3/8"	Center	3/8"	Carbide	€109.47
D	SHR-375-4	3/8"	7/8"	-	UN	-	-	3/8"	-	€88.31
B	SHR-625-4X	5/8"	1 1/4"	H, S	-	5/8"	Center	5/8"	Carbide	€265.19
C	SHL-625-4X	5/8"	2 1/4"	H, S	AlTiN	5/8"	Center	5/8"	Carbide	€335.05
D	SHR-625-4	5/8"	1 1/4"	-	UN	-	-	5/8"	-	€229.16
C	SHL-312-4X	5/16"	1 1/8"	H, S	AlTiN	0.312"	Center	5/16"	Carbide	€109.99
B	SHR-312-4X	5/16"	0.813"	H, S	AlTiN	0.312"	Center	5/16"	Carbide	€89.73
C	SHLM-060-4X	6 mm	25 mm	H, S	AlTiN	6 mm	Center	-	Carbide	€92.95
B	SHRM-060-4X	6 mm	16 mm	H, S	AlTiN	6 mm	Center	-	Carbide	€88.25
E	SHLM-080-4	8 mm	-	-	UN	-	-	-	Solid Carbide	€101.36
C	SHLM-080-4X	8 mm	30 mm	H, S	-	8 mm	Center	-	Carbide	-	RFQ
B	SHRM-080-4X	8 mm	22 mm	H, S	AlTiN	8 mm	Center	8 mm	Carbide	€90.47
C	SHLM-100-4X	10 mm	38 mm	H, S	AlTiN	10 mm	Center	10 mm	Carbide	€141.30

MICRO 100 -

End Mills, Corner Radius, 4 Flute, Variable Helix, Long Reach

Style	Model	Cutting Length	Shank Dia.	Cutter Dia.	Reach Multiple	Corner Radius	Reach	Milling Dia.	Neck Dia.	Price
A	VLR-625-4	1 1/4"	-	5/8"	7.2x	0.03"	4 1/2"	-	-	€319.30
B	VLR-500-4X	1"	1/2"	1/2"	9x	0.03"	4 1/2"	1/2"	15/32"	€231.89
B	VLR-375-4X	3/4"	3/8"	3/8"	7.4x	0.02"	2 3/4"	3/8"	11/32"	€134.63
A	VLR-312-4	5/8"	-	5/16"	8.4x	0.02"	2 5/8"	-	-	€82.50
A	VLRM-060-4	8 mm	-	6 mm	5X	0.5 mm	30 mm	-	-	€77.88
C	VLRM-060-4X	8 mm	6 mm	6 mm	5X	0.5 mm	30 mm	6 mm	5.49 mm	€87.61

MICRO 100 -

End Mills, Square, Single Flute, Upcut Router

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Dimensions Type	Measurement System	List Number	Neck Dia.	Neck Length	Price
A	SFA-500-88	1/2"	1"	1/2"	Fractional Inch	Fractional Inch	SFA	-	-	€118.80
A	SFA-500-812	1/2"	1 1/2"	1/2"	Fractional Inch	Fractional Inch	SFA	-	-	€128.56
B	SFA-250-46	1/4"	3/4"	1/4"	Fractional Inch	Fractional Inch	SFA	-	-	€48.60
B	SFA-250-410	1/4"	1 1/4"	1/4"	Fractional Inch	Fractional Inch	SFA	-	-	€54.76
C	SFA-125-42	1/4"	1/4"	1/8"	Fractional Inch	Fractional Inch	SFA	-	-	€47.68
C	SFA-125-44	1/4"	1/2"	1/8"	Fractional Inch	Fractional Inch	SFA	-	-	€48.60
C	SFA-156-45	1/4"	5/8"	5/32"	Fractional Inch	Fractional Inch	SFA	-	-	€48.60
C	SFA-062-42	1/4"	1/4"	1/16"	Fractional Inch	Fractional Inch	SFA	-	-	€53.85
B	SFA-250-43	1/4"	3/8"	1/4"	Fractional Inch	Fractional Inch	SFA	-	-	€48.55
C	SFA-187-44	1/4"	1/2"	3/16"	Fractional Inch	Fractional Inch	SFA	-	-	€46.73
C	SFA-187-45	1/4"	5/8"	3/16"	Fractional Inch	Fractional Inch	SFA	-	-	€47.68
C	SFA-218-46	1/4"	3/4"	7/32"	Fractional Inch	Fractional Inch	SFA	-	-	€46.73
D	SFA-062-22	1/8"	1/4"	1/16"	Fractional Inch	Fractional Inch	-	-	-	€47.23
C	SFA-125-24	1/8"	1/2"	1/8"	Fractional Inch	Fractional Inch	SFA	-	-	€40.93
C	SFA-125-22	1/8"	1/4"	1/8"	Fractional Inch	Fractional Inch	SFA	-	-	€41.74
B	SFA-375-69	3/8"	1 1/8"	3/8"	Fractional Inch	Fractional Inch	SFA	-	-	€75.99
E	SFA-187-35	3/16"	5/8"	3/16"	Fractional Inch	Fractional Inch	SFA	-	-	€46.11
C	SFA-187-33	3/16"	1/2"	3/16"	Fractional Inch	Fractional Inch	SFA	-	-	€45.23
F	SFAM-020020	6 mm	6 mm	2 mm	Metric	Metric	SFAM	-	-	€51.25
A	SFAM-030020	6 mm	12 mm	3 mm	Metric	Metric	SFAM	-	-	€51.25
A	SFAM-040020	6 mm	16 mm	4 mm	Metric	Metric	SFAM	-	-	€51.25
A	SFAM-050025	6 mm	20 mm	5 mm	Metric	Metric	-	-	-	€52.19
A	SFAM-060030	6 mm	25 mm	6 mm	Metric	Metric	SFAM	-	-	€52.19
A	SFAM-060100	6 mm	20 mm	6 mm	Metric	Metric	SFAM	5.9 mm	40 mm	€78.15
A	SFAM-080040	8 mm	30 mm	8 mm	Metric	Metric	-	-	-	€80.06

MICRO 100 -

End Mills, Single Flute, Router, Downcut

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Loc Multiple	Dimensions Type	Measurement System	List Number	Primary Material Application	Price
A	SFL-500-812	1/2"	1 1/2"	1/2"	3X	Fractional Inch	Fractional Inch	SFL	Composite	€122.80
A	SFL-125-44	1/4"	1/2"	1/8"	4X	Fractional Inch	Fractional Inch	SFL	Composite	€46.73
A	SFL-250-46	1/4"	3/4"	1/4"	3X	Fractional Inch	Fractional Inch	-	Composite	€47.68
A	SFL-062-42	1/4"	1/4"	1/16"	4X	Fractional Inch	Fractional Inch	SFL	Composite	€54.57
A	SFL-125-42	1/4"	1/4"	1/8"	2x	Fractional Inch	Fractional Inch	SFL	Composite	€47.68
A	SFL-250-43	1/4"	3/8"	1/4"	1.5x	Fractional Inch	Fractional Inch	SFL	Composite	€47.68
A	SFL-250-410	1/4"	1 1/4"	1/4"	5X	Fractional Inch	Fractional Inch	SFL	Composite	€53.75
A	SFL-125-22	1/8"	1/4"	1/8"	2x	Fractional Inch	Fractional Inch	SFL	Composite	€40.42
A	SFL-125-24	1/8"	1/2"	1/8"	4X	Fractional Inch	Fractional Inch	SFL	Composite	€50.65
A	SFLM-030-20	3 mm	12 mm	3 mm	4X	Metric	Metric	SFLM	Composite	€40.09
A	SFLM-020-10	3 mm	6 mm	2 mm	3X	Metric	Metric	SFLM	Composite	€44.26
A	SFLM-030-10	3 mm	8 mm	3 mm	2.7x	Metric	Metric	SFLM	Composite	€43.69
A	SFLM-010-10	3 mm	5 mm	1 mm	5X	Metric	Metric	SFLM	Composite	€44.26
A	SFL-375-69	3/8"	1 1/8"	3/8"	3X	Fractional Inch	Fractional Inch	SFL	Composite	€70.06
A	SFL-187-33	3/16"	1/2"	3/16"	2.7x	Fractional Inch	Fractional Inch	SFL	Composite	€44.33
A	SFL-187-35	3/16"	5/8"	3/16"	3.4x	Fractional Inch	Fractional Inch	SFL	Composite	€44.67
A	SFLM-040-20	4 mm	15 mm	4 mm	3.8x	Metric	Metric	SFLM	Composite	€43.33
A	SFLM-040-60	6 mm	20 mm	4 mm	5X	Metric	Metric	SFLM	Composite	€52.41
A	SFLM-060-10	6 mm	16 mm	6 mm	2.7x	Metric	Metric	SFLM	Composite	€62.87
A	SFLM-060-20	6 mm	20 mm	6 mm	3.4x	Metric	Metric	SFLM	Composite	€64.22
A	SFLM-050-70	8 mm	20 mm	5 mm	4X	Metric	Metric	SFLM	Composite	€73.27
A	SFLM-060-60	8 mm	20 mm	6 mm	3.4x	Metric	Metric	SFLM	Composite	€72.21
A	SFLM-040-80	8 mm	20 mm	4 mm	5X	Metric	Metric	SFLM	Composite	€72.21

MICRO 100 -

End Mills, Single Flute, Router, Upcut

Style	Model	Shank Dia.	Cutting Length	Cutter Dia.	Dimensions Type	Measurement System	List Number	Neck Length	Neck Dia.	Price
A	SFP-500-88	1/2"	1"	1/2"	Fractional Inch	Fractional Inch	Sfp	-	-	€117.01
B	SFP-500-812	1/2"	1 1/2"	1/2"	Fractional Inch	Fractional Inch	Sfp	-	-	€115.45
C	SFP-250-410	1/4"	1 1/4"	1/4"	Fractional Inch	Fractional Inch	-	-	-	€53.75
D	SFP-062-42	1/4"	1/4"	1/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€54.57
D	SFP-125-42	1/4"	1/4"	1/8"	Fractional Inch	Fractional Inch	Sfp	-	-	€47.68
D	SFP-125-44	1/4"	1/2"	1/8"	Fractional Inch	Fractional Inch	Sfp	-	-	€47.10
D	SFP-156-45	1/4"	5/8"	5/32"	Fractional Inch	Fractional Inch	Sfp	-	-	€46.99
C	SFP-250-46	1/4"	3/4"	1/4"	Fractional Inch	Fractional Inch	Sfp	-	-	€48.60
C	SFP-250-43	1/4"	3/8"	1/4"	Fractional Inch	Fractional Inch	Sfp	-	-	€47.68
D	SFP-187-44	1/4"	1/2"	3/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€47.68
D	SFP-187-45	1/4"	5/8"	3/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€48.60
D	SFP-062-22	1/8"	1/4"	1/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€45.42
D	SFP-125-24	1/8"	1/2"	1/8"	Fractional Inch	Fractional Inch	Sfp	-	-	€40.93
D	SFP-125-22	1/8"	1/4"	1/8"	Fractional Inch	Fractional Inch	Sfp	-	-	€39.52
A	SFPM-030-10	3 mm	8 mm	3 mm	Metric	Metric	SFPM	-	-	€44.26
A	SFPM-030-20	3 mm	12 mm	3 mm	Metric	Metric	SFPM	-	-	€40.09
A	SFPM-010-10	3 mm	5 mm	1 mm	Metric	Metric	SFPM	-	-	€44.26
A	SFPM-020-10	3 mm	6 mm	2 mm	Metric	Metric	SFPM	-	-	€44.26
A	SFPM-020-20	3 mm	10 mm	2 mm	Metric	Metric	SFPM	-	-	€40.09
A	SFPM-020-30	3 mm	12 mm	2 mm	Metric	Metric	SFPM	-	-	€43.69
A	SFPM-020-40	3 mm	14 mm	2 mm	Metric	Metric	SFPM	-	-	€51.25
C	SFP-375-69	3/8"	1 1/8"	3/8"	Fractional Inch	Fractional Inch	Sfp	-	-	€71.54
D	SFP-187-35	3/16"	5/8"	3/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€45.23
D	SFP-187-33	3/16"	1/2"	3/16"	Fractional Inch	Fractional Inch	Sfp	-	-	€45.23
A	SFPM-040-10	4 mm	12 mm	4 mm	Metric	Metric	SFPM	-	-	€46.20

Popular Search Queries

Keyed Shaft

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Indexable End Mills

End Mills, Single Flute, Downcut Router

End Mills, Diamond Cut, Fish Tail End Cut

End Mills, Single Flute, Upcut Router, Square

End Mills, Ball, Reduced Neck

End Mills, Diamond Cut, Burr End Cut

End Mills, Diamond Cut, End Mill End Cut

VLM Corner Radius, End Mills, Variable Helix, Long Flute

Carbide Ball End Mills, Metric

Carbide Ball End Mills, Metric, AlTiN Coated

Corner Radius End Mills, 2 Flute, Reduced Neck

AECM/GEC Corner Radius End Mills

HMCM Corner Radius End Mills

VHS/VHSM/VHM/VHMM Corner Radius End Mills

Corner Radius, End Mills, 4 Flute, Variable Helix

Square End Mills, 2 Flute, Solid Carbide

GEL/GELM/AELM Square End Mills, Long Flute

SHR/SHRM/SHL/SHLM Square End Mills

End Mills, Corner Radius, 4 Flute, Variable Helix, Long Reach

End Mills, Square, Single Flute, Upcut Router

End Mills, Single Flute, Router, Downcut

End Mills, Single Flute, Router, Upcut

Popular Search Queries

Explore More

Select your cookie preferences

Strictly Necessary Cookies

Advertising

Recommendations

Functionality

Analytics

Categories

Brands

MICRO 100 Indexable End Mills

Popular Search Queries

Explore More