Deck Nails

What are the different types of nails for decks?

• Common Nails: They have large heads and a thick shank, making them ideal for deck framing. They are difficult to drive in because they can cause splitting of wood.
• Box Nails: They are the same size as regular nails but have a much thinner shank, which reduces the likelihood of wood splitting.
• Spiral Nails: They cling to wood fibres and thus, are difficult to remove.
• Finishing Nails: They have small barrel heads with slender shanks and are commonly used for trim work.
• Casing Nails: They are larger versions of finishing nails that provide more holding power.

What is the advantage of decking screws over other screws?

Decking screws are corrosion-resistant, self-sinking, tapered and extremely sharp. Stainless steel screws, like stainless steel nails, have the highest levels of corrosion resistance, but are also the most expensive.

How to install these deck nails?

• Lay the deck on top of the frame.
• Mark the hole centre where the nail is to be installed.
• Drill a hole in the board to prevent splitting of the board.
• Position a deck nail at least 1 inch from the board's edge and hammer the head to insert the nail into the board.